DisplayBoard_PCB
VogelPapaFinn
Components (30)
| Reference | Value | Description |
|---|---|---|
| Q1 | Si2302CDS-T1-GE3 | 380 mAmps, 60V N–Channel SOT-23 |
| U1 | ESP32-S3-PICO-1-N8R2 | |
| U2 | SN65HVD232 | CAN Bus Transceivers, 3.3V, 1Mbps, SOIC-8 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| USBC1 | USB4105-GF-A | |
| C1 | 1uF | Unpolarized capacitor |
| C2,C15 | 22uF | Unpolarized capacitor |
| C3,C6,C7,C10,C13 | 100nF | Unpolarized capacitor |
| C4,C5 | 3.3pF | Unpolarized capacitor |
| C8,C9 | unkwn | Unpolarized capacitor |
| C11,C12 | 47uF | Unpolarized capacitor |
| C14 | 10uF | Unpolarized capacitor |
| D1 | SP4020-01FTG-C | 21.8V (Typ) Clamp 30A (8/20µs) Ipp Tvs Diode Surface Mount SOD-323 |
| D2 | PESD1CAN | 70VC Clamp 3A@8/20us Ipp ESD DIODE SOT-23 for CAN |
| FB1 | BLM18KG121TN1D | Ferrite bead |
| J1 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J2 | Conn_01x16 | Generic connector, single row, 01x16, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 2.2nH | Inductor |
| L2 | TDK ACT45B-510-2P-TL003 | 51uH@100kHz 2Line Common Mode Choke Surface Mount 4.5x3.2mm 2.8kΩ@10MHz 200mA DCR 1Ω for CAN |
| R1 | 470 | Resistor |
| R2,R3,R5-R7 | 10k | Resistor |
| R4,R12 | 100 | Resistor |
| R8 | 100k | Resistor |
| R9 | 10 | Resistor |
| R10,R11 | 3 | Resistor |
| RST1 | SW_SPST | Single Pole Single Throw (SPST) switch |
| Rusb1,Rusb2 | 5.1k | Resistor |
| SPST1 | BOOT | Single Pole Single Throw (SPST) switch |