SG-SGMB
WAAAJIAN
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | LRC L8050QLT1G | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q3 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| U3 | SGM2212_3.3 | 1A Low Dropout regulator, positive, 1.5V fixed output, SOT-223 |
| U4 | CP2102N-Axx-xQFN28 | USB to UART master bridge, QFN-28 |
| C1,C19 | 1uF/25V | GRM155R61E105KA12D |
| C2,C14,C16,C21,C22 | 10uF/25V | GRM21BR61E106KA73K |
| C3-C9,C11,C12,C15,C17,C18,C20 | 0.1uF/25V | GRM033R61E104KE14J |
| C10 | 10nF/25V | C0402C103J3RECAUTO |
| C13 | 2.2nF/25V | C0402C222J3GEC7411 |
| D1 | LED | KT-0603W |
| D2-D4 | LESD5D5.0CT1G | Bidirectional ESD protection diode, ±5.5Vrwm, 0.23pF, SG-WLL-2-3 |
| J4 | Conn_02x04_Top_Bottom | Generic connector, double row, 02x04, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_02x02_Top_Bottom | Generic connector, double row, 02x02, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6-J11 | HCTL HC-5264-3A | Generic connector, single row, 01x03, script generated |
| J12 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J13 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R6,R7,R14 | 10kΩ | RMCF0402FT10K0CT-ND |
| R2,R8,R9,R13,R15,R19 | 0Ω | RMCF0402ZT0R00CT-ND |
| R3,R4 | 4.7kΩ | RMCF0603FT4K70 |
| R5,R17,R18 | 5.1kΩ | RMCF0603FT5K10 |
| R10 | 22.1kΩ | RMCF0603FT22K1 |
| R11 | 47.5kΩ | RMCF0603FT47K5 |
| R12 | 1kΩ | RMCF0603FT1K00 |
| R16 | 100kΩ | RMCF0603FT100K |
| RPi4_ModelB_Stacking_Header_2x20_Pitch_2.54mm1 | J1 | Generic connector, double row, 02x20, row letter last pin numbering scheme (pin number consists of a letter for the row and a number for the pin index in this row. 1a, ..., Na; 1b, ..., Nb)), script generated (kicad-library-utils/schlib/autogen/connector/) |
| SN74LVC2G1 | Logic | SN74LVC2G241DCUR |
| SW1,SW2 | SW_SPST | PTS647 Series |