pcb-docs
WestianPKl
Components (34)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC817-40-DIO | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q2,Q3 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | PCA9306DCUR | Dual bidirectional I2C Bus and SMBus voltage level translator |
| A1 | RaspberryPi Pico 2W | Versatile and inexpensive wireless microcontroller module (with debug pins) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash, Infineon CYW43439 2.4GHz 802.11n wireless LAN; also supports Raspberry Pi Pico 2 W |
| BZ1 | Buzzer 5V 12mm | Buzzer, polarized |
| C1-C3,C5-C8 | 100nF | Unpolarized capacitor |
| C4 | 10uF | Unpolarized capacitor |
| D1 | 1N4148W-DIO | 75V 0.15A Fast Switching Diode, SOD-123 |
| D2 | OSTBPCS2C2B | RGB LED with integrated controller, 5mm Package |
| D3 | SMF5.0A | 500mW Zener Diode, SOD-123F |
| D4,D5 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_PowerOnly_6P | USB Power-Only 6P Type-C Receptacle connector |
| J2 | Sensor | Generic connector, single row, 01x04, script generated |
| J3 | LCD 16x2 | Generic connector, single row, 01x04, script generated |
| J4 | ATMega | Generic connector, single row, 01x04, script generated |
| J5 | DEBUG | Generic connector, single row, 01x03, script generated |
| J6 | Pico_Con1 | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Pico_Con2 | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | CAN | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Modbus | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | I2C | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | Relay | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1-JP5 | Jumper_2_Bridged | Jumper, 2-pole, closed/bridged |
| L1 | BLM18AG221SN1D | Inductor with ferrite core, small symbol |
| R1,R9 | 1kR | Resistor |
| R2-R4 | 220R | Resistor |
| R5,R6 | 5k1R | Resistor |
| R7 | 100kR | Resistor |
| R8 | 200kR | Resistor |
| R10,R11 | NC | Resistor |
| R12,R13,R18-R23 | 4k7R | Resistor |
| R14 | 330R | Resistor |
| R15 | 330 | Resistor |
| SW1,SW2 | Tact Switch 6x6mm / 13mm | Push button switch, generic, two pins |