signalmesh_CAD
akielaries
signalmesh schematic and PCB files
Components (29)
| Reference | Value | Description |
|---|---|---|
| U32,U33,U35,U41,U42 | OPA196xDGK | Single, Low-Power, Low Offset Voltage, Rail-to-Rail Operational Amplifier, VSSOP-8 |
| ACTV_LPF_CUTOFF1,RESONANCE1,VOL_BALANCE1 | 100k | Potentiometer |
| C11,C20 | 1uf | Unpolarized capacitor, small symbol |
| C18,C19 | 10nf | Unpolarized capacitor, small symbol |
| D33 | LPF_ON | Light emitting diode |
| D34 | HPF_ON | Light emitting diode |
| D35 | BPF_ON | Light emitting diode |
| D36 | BSF_ON | Light emitting diode |
| D39-D44 | 1N4001 | 50V 1A General Purpose Rectifier Diode, DO-41 |
| J13 | STEREO_OUT | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | STEREO_IN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J16 | 12V- | Generic connector, single row, 01x01, script generated |
| J17 | GND | Generic connector, single row, 01x01, script generated |
| J19 | 12V+ | Generic connector, single row, 01x01, script generated |
| K1,SW8 | LPF_TOGGLE | Standex Meder DIP reed relay, SPST, Closing Contact,Switch, single pole double throw |
| K2-K4 | DIPxx-1Axx-11x | Standex Meder DIP reed relay, SPST, Closing Contact |
| R51,R52 | 10K | Resistor |
| R58,R59 | 1K | Resistor |
| R60-R63 | 300 | Resistor |
| R64,R70 | 10k | Resistor |
| R65,R71 | 6k8 | Resistor |
| R67,R103 | 200k | Resistor |
| R69 | 33k | Resistor |
| R104 | 100K | Resistor |
| SW1 | LPF_FBCK_OUT | Switch, single pole double throw |
| SW3 | BPF_TOGGLE | Switch, single pole double throw |
| SW5 | LPF_FBCK_IN | Switch, single pole double throw |
| SW6 | BSF_TOGGLE | Switch, single pole double throw |
| SW7 | HPF_TOGGLE | Switch, single pole double throw |