humanoid-robot

amyleesterling

detailed specs to build a humanoid robot (with kids)

Components (8)

Reference	Value	Description
Q4X1	Banner Q4XFULAF110-Q8 / 97540	Independent displacement witness only. Pin 2 is parked and must be configured inactive. Pin 5 is not inferred to be identical to pin 3.
CBLPS1	Alpha Wire 881802 - 2C 18 AWG	Unshielded 2C 18 AWG; nominal 5.64 mm OD fits the selected 3.5-7 mm gland arithmetically. Received OD and gland retention required.
CBLQ4X1	Banner BC-M12F5-22-2-SF / 815158	2 m 5x22 AWG cordset. Manufacturer wording says shield floating to drain; drain parks only at XQ1.6.
PS1	Keithley 2220-30-1 CH1 ONLY	24.0 V candidate. Current-limit value, lock and received tests remain SELECTION REQUIRED. CH2 disabled and unconnected.
PTCB1	Phoenix PTCB E1 24DC/0.1A NO / 1464484	Fixed 0.1 A electronic breaker. Typical 1.2x active limiting is not treated as a guaranteed hard ceiling. Remote contact is deliberately unwired.
TEST1	ISOLATED ANALOG LEAD FIXTURE - SELECTION REQUIRED	Guarded physical lead fixture, touch protection, strain relief and isolation are unresolved.
XQ1.1	Phoenix PT 2,5-QUATTRO / 3209578	One potential, four push-in connections. Port D has no conductor in the candidate assembly.
XQ1.2-XQ1.6	Phoenix PT 2,5 / 3209510	Analog output feed-through.,Analog-ground feed-through; not bonded to Q4X 0 V by project wiring.,Drain parking terminal only.,Insulated remote-input parking potential; no external drive.,Protected-positive feed-through terminal.