Loading design…
anshinx
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q6-Q9,Q14-Q21 | IAUS300N08S5N0 | N-Channel 80V 300A _Tc_ 300W _Tc_ Surface Mount PG-HSOG-8-1 |
| U1 | STM32G474VETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 170 MHz, 1.71-3.6V, 86 GPIO, LQFP100 |
| U2 | LM5017MR | 600mA, 100V Step-Down Switching Regulator, PowerSO-8 |
| U3,U14 | AP2204K-5.0 | 150mA low dropout linear regulator, wide input voltage range, 5.0V fixed positive output, SOT-23-5 |
| U4,U12 | XC6206 - 3V3 | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U5,U11,U13 | INA241A2 | High- and Low-Side, Bidirectional, Zero-Drift, Current-Sense Amplifier With Enhanced PWM Rejection, 20V/V, ±0.01% Gain Accuracy, ±10 μV Offset Voltage, SOIC-8 |
| U6,U9,U10 | IRS21867S | High and Low Side Driver, 600V, 4.0/4.0A, SOIC-8 |
| U8 | TJA1051T | High-Speed CAN Transceiver, silent mode, SOIC-8 |
| BZ1 | Buzzer | Buzzer, polarized |
| C1-C3 | 680uF / 100V | Unpolarized capacitor |
| C4-C6 | 10uF / 100V | Unpolarized capacitor |
| C7,C9,C11,C13,C17,C25 | 1uF | Unpolarized capacitor |
| C8,C12,C14,C31 | 2.2uF | Unpolarized capacitor |
| C10 | .1uF | Unpolarized capacitor |
| C15 | 3.3nF | Unpolarized capacitor |
| C16 | 15nF | Unpolarized capacitor |
| C18,C20,C21,C23,C24,C26,C28,C36,C45,C47,C48,C50,C51,C53,C54,C56,C63-C67,C70-C74,C77-C82,C84,C86,C89 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C19,C22,C46,C49,C52,C55,C61,C62,C68,C69,C75,C76 | 10uF | Unpolarized capacitor |
| C27 | 10uf | Unpolarized capacitor |
| C29,C30 | 22pF | Unpolarized capacitor |
| C33-C35,C83,C85,C87 | 10nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C39,C40,C57,C88,C90 | 4.7uF | Unpolarized capacitor |
| D1 | SR5100 | Diode |
| D2 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D3 | LED_R | Light emitting diode |
| D4,D5,D7 | US1M | 1000V, 1A, General Purpose Rectifier Diode, SMA(DO-214AC) |
| FB1 | 12R | Ferrite bead |
| J1 | I2C EKRAN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | HALL INPUT | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3,J4,J7,J12 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8,J9 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | USB_C_Receptacle | USB 2.0-only 16P Type-C Receptacle connector |
| J13 | OUTSIDE LED | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 220uH 2A | Inductor |
| MP1,MP3 | Phase_A | |
| MP2 | Phase_B | |
| R1 | 220K | Resistor |
| R3 | 100K | Resistor |
| R4 | 86.6K | Resistor |
| R5,R7,R8,R50 | 10K | Resistor |
| R6 | 46k | Resistor |
| R9,R10,R14-R16,R20 | 4.7K | Resistor |
| R11 | 1K | Resistor |
| R12,R21 | 260 | Resistor |
| R13,R26-R28,R30-R37,R55-R57 | 10R | Resistor |
| R17-R19 | 2.2K | Resistor |
| R22 | 120R | Resistor |
| R29,R39,R60,R62,R65,R67 | 10 | Resistor, small US symbol |
| R38,R61,R66,R70-R72 | 1mR | Resistor, US symbol |
| R51,R52 | 5.1K | Resistor |
| R53,R54 | 22 | Resistor |
| R58,R59,R63,R64,R68,R69 | 10k | Resistor |
| R73 | 470 | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | 8MHz | Two pin crystal |