Loading design…
arcticlula
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.
| Reference | Value | Description |
|---|---|---|
| Q1,Q4 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| Q2,Q3,Q5-Q7 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna |
| U2,U3 | 74LVC1G3157 | SPDT Analog Switch, Low-Voltage CMOS |
| U4 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| 3v31,3v32,5V1,B+1,B-1,G1,GND1-GND6,LDO1,TX1,VCC1,VCC2 | TestPoint_Alt | test point (alternative shape) |
| A1,B1 | Conn_02x12_Odd_Even | Generic connector, double row, 02x12, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| BAT1,BUZZER A1,BUZZER B1,CELL1 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| BMS1 | FS312MH |
|---|
| BOOT1,PWR1,RST1,RTC_RST1 | SW_Push | Push button switch, generic, two pins |
|---|
| C1,C2,C13,C19 | 100nF | Unpolarized capacitor |
|---|
| C3,C8,C10 | 1nF | Unpolarized capacitor |
|---|
| C4 | 2.2uF | Unpolarized capacitor |
|---|
| C5 | 10nF | Unpolarized capacitor |
|---|
| C6,C15,C17,C20 | 10uF | Polarized capacitor,Unpolarized capacitor |
|---|
| C7,C9,C11,C14,C18,C21,C22 | 0.1uF | Unpolarized capacitor |
|---|
| C12,C16 | 1uF | Unpolarized capacitor |
|---|
| D1 | LED | Light emitting diode |
|---|
| D2,D6-D8 | BAT20J |
|---|
| D3 | BLUE | Light emitting diode |
|---|
| D4 | orange | Light emitting diode |
|---|
| D5 | green | Light emitting diode |
|---|
| DRV1 | DRV8833PWP | Dual H-Bridge Motor Driver, HTSSOP-16 |
|---|
| H1-H8 | MountingHole | Mounting Hole without connection |
|---|
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| R1,R2,R13 | 10k | Resistor |
|---|
| R3,R7,R8 | 0 | Resistor |
|---|
| R4,R5 | 5.1K | Resistor |
|---|
| R6 | 499 | Resistor |
|---|
| R9,R17-R20,R24,R25,R28,R29 | 100k | Resistor |
|---|
| R10,R14,R21,R22 | 2.2K | Resistor |
|---|
| R11,R12 | 110 | Resistor |
|---|
| R15,R16 | 4.7k | Resistor |
|---|
| R23 | 56k | Resistor |
|---|
| R26 | 1.5k | Resistor |
|---|
| R27 | 100 | Resistor |
|---|
| R30 | 2K | Resistor |
|---|
| RTC1 | DS3231MZ | ±5ppm, I2C Real-Time Clock SOIC-8 |
|---|
| TP1 | TP4056 |
|---|