Loading design…
arsoninstigator
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F042C6Tx | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 6KB RAM, 48 MHz, 2.0-3.6V, 38 GPIO, LQFP48 |
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| C1-C6 | 0.1uF | Unpolarized capacitor |
| C7 | 10uF | Unpolarized capacitor |
| C8 | 22uF | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| D4 | SS14 | 40V 1A Schottky Diode, SMA |
| J1 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J3,J4 | Conn_01x22 | Generic connector, single row, 01x22, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 10k | Resistor |
| R2,R5 | 51R | Resistor |
| R3,R4 | 5.1k | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |