Loading design…
arsoninstigator
| Reference | Value | Description |
|---|---|---|
| IC1 | VL53L1CBV0FY_1 | Time of Flight Ranging Sensor 12-Pin LGA T/R |
| Q1 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| Q3,Q4 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U2 | STM32G431CBTx | STMicroelectronics Arm Cortex-M4 MCU, 128KB flash, 32KB RAM, 170 MHz, 1.71-3.6V, 38 GPIO, LQFP48 |
| U3 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| U4 | XC6206PxxxMR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| C4-C7,C12 | 100n | Unpolarized capacitor |
| C8 | 10u | Unpolarized capacitor |
| C9 | 10n | Unpolarized capacitor |
|---|
| C10,C11,C16,C17 | 1u | Unpolarized capacitor |
|---|
| C13 | 4u7 | Unpolarized capacitor |
|---|
| C14,C15 | 10p | Unpolarized capacitor |
|---|
| D1,D5-D10,D12-D18,D20-D23 | D_TVS | Bidirectional transient-voltage-suppression diode |
|---|
| D2 | D_Schottky | Schottky diode |
|---|
| D3,D11,D19,D24-D26 | LED | Light emitting diode |
|---|
| D4 | LED_ARBG | RGB LED, anode/red/blue/green |
|---|
| FB1,FB2 | 120R @ 100MHz | Ferrite bead |
|---|
| J1,J5 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3,J4 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1,R2,R4,R5,R7,R8,R14,R15 | 10k | Resistor |
|---|
| R3,R6 | 55R | Resistor |
|---|
| R9,R10,R13 | 75R | Resistor |
|---|
| R11 | 20R | Resistor |
|---|
| TP2 | TestPoint | test point |
|---|
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |
|---|