3d-junkyard
bleroy
Random 3D models
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q2 | DMG2305UX | -0.18A Id, -60V Vds, P-Channel MOSFET, TO-92 |
| U1,U2,U5 | SN74LVC8T245 | 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs |
| U3 | ATtiny1616-M | 20MHz, 16kB Flash, 2kB SRAM, 256B EEPROM, VQFN-20 |
| U4 | NCP1117-3.3 | |
| U6,U8 | SN74LVC2T45DCUR | Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs, VSSOP-8 |
| U7 | RP2040 | A microcontroller by Raspberry Pi |
| U9 | W25Q128JVS | |
| C1,C2,C4,C6-C13,C15-C18,C20,C29,C30,C32,C38,C39,C42 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C3,C5,C14,C19,C21,C31,C40 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C23,C26-C28 | 10uF | Unpolarized capacitor, small symbol |
| C24,C25 | 15pF | Unpolarized capacitor |
| D1 | LED_G | Light emitting diode |
| D2 | LED_R | Light emitting diode |
| D3 | MBR120VLSFT1G | Schottky diode |
| J1 | Micro_SD_Card | Micro SD Card Socket with one card detection pin |
| J3,J9 | SM03B-SRSS-TB | |
| J8 | USB_B_Micro | |
| R1,R30-R32 | 1k | |
| R2,R3,R11,R33 | 10k | |
| R4-R10 | 47k | |
| R26,R28 | 27 | |
| R36 | DNF | |
| SW2,SW3 | SW_TACTILE | |
| X1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |