3d-junkyard
bleroy
Random 3D models
Components (42)
| Reference | Value | Description |
|---|---|---|
| Q1 | 2N7000 | 0.2A Id, 200V Vds, N-Channel MOSFET, 2.6V Logic Level, TO-92 |
| Q2 | TP0610L | -0.18A Id, -60V Vds, P-Channel MOSFET, TO-92 |
| U1 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U2 | CH334R | USB HUB controller, UART, QSOP-16 |
| U3 | NCP1117-3.3_SOT223 | |
| U4 | W25Q128JVS | |
| U5 | RP2350_80QFN | |
| U7-U10 | SN74LVC8T245 | 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs |
| USB1-2 | USB_A_Dual | USB Type A connector, stacked |
| C1,C24,C27,C29,C32,C34-C37,C41,C42 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2,C31 | 15pF | Unpolarized capacitor |
| C3,C38-C40 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C4,C5,C22 | 10u | |
| C6,C8-C17,C21 | 100n | |
| C7,C18-C20 | 4.7u | |
| C23 | 1nF | Unpolarized capacitor, small symbol |
| C25,C26,C28,C30,C33 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| D1 | LED_RGB | RGB LED, 6 pin package |
| D2 | WS2812B | RGB LED with integrated controller |
| F1 | 100mA | Fuse |
| J1 | USB_B_Micro | |
| J2,J3,J7,J9 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | SM03B-SRSS-TB | |
| J5 | Conn_02x09_Counter_Clockwise | Generic connector, double row, 02x09, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3u | |
| L2-L15 | 10uH | Inductor |
| L16 | 22uH | Inductor |
| R1,R7,R9,R37-R42 | 1k | |
| R2 | 33 | |
| R3,R4 | 27 | |
| R5 | DNF | |
| R6,R14-R20,R35 | 100 | |
| R8 | 0 | |
| R12,R13,R36 | 10k | |
| R21,R24-R26 | 470 | |
| R22,R23,R27-R34 | 220 | |
| SW1 | SW_Option | Push button switch, generic, two pins |
| SW2 | SW_USB_BOOT | |
| SW3 | SW_RUN | |
| X4 | 12MHz | Four pin crystal, GND on pins 2 and 4 |