3d-junkyard
bleroy
Random 3D models
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1 | 2N7000 | 0.2A Id, 200V Vds, N-Channel MOSFET, 2.6V Logic Level, TO-92 |
| Q2 | DMG2305UX | -0.18A Id, -60V Vds, P-Channel MOSFET, TO-92 |
| U1 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U2 | CH334R | USB HUB controller, UART, QSOP-16 |
| U3 | NCP1117-3.3 | |
| U4 | RP2040 | A microcontroller by Raspberry Pi |
| U5 | W25Q128JVS | |
| U7-U10 | SN74LVC8T245 | 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs |
| C1,C6,C8-C15,C19,C24,C27,C29,C32,C34-C37,C41,C42 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2-C5,C38-C40 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C7,C16,C20,C25,C26,C28,C30,C33 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C17,C18 | 15pF | Unpolarized capacitor |
| C23 | 1nF | Unpolarized capacitor, small symbol |
| D1 | MBR120VLSFT1G | Schottky diode |
| D2 | WS2812B | RGB LED with integrated controller |
| F1 | 100mA | Fuse |
| J1 | USB_B_Micro | |
| J8 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | SM03B-SRSS-TB | |
| L2-L15 | 10uH | Inductor |
| L16 | 22uH | Inductor |
| R1,R7,R8,R37-R40 | 1k | |
| R2-R5 | 27 | |
| R6,R14-R20,R35 | 100 | |
| R11-R13,R36 | 10k | |
| R21,R24-R26 | 470 | |
| R22,R23,R27-R34 | 220 | |
| SW1-SW4 | SW_TACTILE | Push button switch, generic, two pins |
| X1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |