Loading design…
bostang
My repository for documenting all PCB Projects I have done
| Reference | Value | Description |
|---|---|---|
| U1 | ATmega328-P | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28 |
| U2 | LM7805_TO220 | Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220 |
| BT1 | 9V | Single-cell battery |
| C1,C2 | 22p | Unpolarized capacitor |
| C3,C4 | 10n | Polarized capacitor |
| C5 | 1n | Polarized capacitor |
| D1 | RED | Light emitting diode |
| D2 | YELLOW | Light emitting diode |
| D3 | GREEN | Light emitting diode |
| R1-R4 | 10K | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_SPDT | Switch, single pole double throw |
| Y1 | 16MHz | Two pin crystal |