telemetry-rusolar
bquangDinh
Components (42)
| Reference | Value | Description |
|---|---|---|
| U1 | TJA1051TK-3 | High-Speed CAN Transceiver, separate VIO, silent mode, DFN-8 |
| U2 | STM32H723ZGTx | STMicroelectronics Arm Cortex-M7 MCU, 1024KB flash, 564KB RAM, 550 MHz, 1.62-3.6V, 114 GPIO, LQFP144 |
| U3 | STM32H725VETx | STMicroelectronics Arm Cortex-M7 MCU, 512KB flash, 564KB RAM, 550 MHz, 1.71-3.6V, 69 GPIO, LQFP100 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1-C14,C20,C28,C31-C44,C48 | 100n | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C15,C16,C19,C29,C45,C49 | 10u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C17,C47 | 10n | Unpolarized capacitor |
| C18,C46 | 1u | Unpolarized capacitor |
| C21,C22 | 14p | Unpolarized capacitor |
| C23,C24 | 2.2u | Unpolarized capacitor |
| C25,C26 | 22uF | Unpolarized capacitor |
| C27 | 100 uF | Unpolarized capacitor |
| C30 | 47 uF | Unpolarized capacitor |
| D1 | TX | Light emitting diode, small symbol |
| D2 | RX | Light emitting diode, small symbol |
| D3 | PWR | Light emitting diode, small symbol |
| D4 | SD-ON | Light emitting diode |
| FB1,FB2 | FerriteBead | Ferrite bead |
| J1 | USART2 | Generic connector, single row, 01x04, script generated |
| J2,J9-J11,J14 | Conn_01x16_Socket | Generic connector, single row, 01x16, script generated |
| J3,J8 | CAN | Generic connector, single row, 01x02, script generated |
| J4 | SPI1 | Generic connector, single row, 01x05, script generated |
| J5 | SWD | Generic connector, single row, 01x05, script generated |
| J6 | I2C1 | Generic connector, single row, 01x04, script generated |
| J7 | JP | Generic connector, single row, 01x02, script generated |
| J12,J13 | Conn_02x16_Odd_Even | Generic connector, double row, 02x16, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J15 | Barrel_Jack_Switch | DC Barrel Jack with an internal switch |
| J16,J20 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J17,J19 | Micro_SD_Card | Micro SD Card Socket |
| J18 | Conn_01x10_Socket | Generic connector, single row, 01x10, script generated |
| L1 | 1 uH | Inductor |
| NOTE_SW1 | SW_SPDT_MSM | Switch, single pole double throw, center OFF position |
| R1 | 10k | Resistor |
| R2,R7,R10,R11 | 5k1 | Resistor |
| R3-R5 | 1k5 | Resistor |
| R6 | 120 | Resistor |
| R8 | 1 | Resistor |
| R9 | 330 | Resistor |
| R15-R24 | 47k | Resistor |
| SW1 | RESET | Push button switch, generic, two pins |
| SW2 | SW_BOOT | Switch, single pole double throw |
| Y1 | 50MHz | Four pin crystal, GND on pins 2 and 4 |