reform-next-mirror
cetola
Components (79)
| Reference | Value | Description |
|---|---|---|
| U1 | reform2-som-connector | |
| U2 | TVS2200DRV | Flat-Clamp Surge Protection Device. 22Vrwm, WSON-6 |
| U4 | Si52112-B5 | |
| U5,U11 | LM62460 | |
| U6 | PCF8523T | |
| U7 | USB2514B_Bi | USB 2.0 Hi-Speed Hub Controller |
| U8,U13,U14,U17,U19 | FSUSB42MUX | Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) or UART Switch, MSOP-10 |
| U9 | W25Q128JVS | |
| U10 | RP2350_60QFN | |
| U12 | TS3USB30EDGSR | ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, VSSOP-10 |
| U15 | BQ25792 | I²C Controlled,1-4 Cell, 5-A Buck-Boost Battery Charger with Dual-Input Selector and USB PD 3.0 OTG Output |
| U16 | CH340N | USB serial converter, UART, SOIC-8 |
| U18 | TCA6408APW | Low-Voltage 8-bit I2C and SMBus I/O Expander, TSSOP-16 |
| U20 | TPS560430X3FDBVR | |
| C1,C9,C10,C13,C15,C17,C20,C22-C30,C35,C36,C44-C48,C62,C64,C65,C72,C73,C77,C79,C80,C142 | 0.1uF | |
| C2,C3,C31,C39,C55,C58,C63,C75,C81-C87,C97,C99,C105,C107,C108,C110-C118 | 10uF | Unpolarized capacitor, small symbol |
| C4,C66 | 10pF | |
| C5,C54,C59,C61,C109,C119,C120 | 470nF | Unpolarized capacitor, small symbol |
| C6,C11,C14,C16,C57,C67-C71 | 22uF | |
| C7,C8,C74,C76 | 18pF | |
| C12,C32-C34,C37,C38,C43 | 47uF | |
| C18,C19 | 15pF | |
| C21,C40-C42,C78,C102 | 4.7uF | Unpolarized capacitor, small symbol |
| C56,C60 | 1uF | |
| C98 | 2.2uF/50V | Unpolarized capacitor, small symbol |
| C100,C101,C103 | 47nF | Unpolarized capacitor, small symbol |
| C104 | 1nF/50V | Unpolarized capacitor, small symbol |
| D2,D3 | CD0603-B0240R | Diode, small symbol |
| D4,D6,D10,D14 | Red | Light emitting diode, small symbol |
| D5,D8 | ESDS314 | 4-channel 1Gbps TVS Diode Array, 2.3pF, 4.5V breakdown, 30kV contact & air gap, SOT-23-5 |
| D7 | CUHZ20V,H3F | Zener diode, small symbol |
| D12,D13 | SBR1A30T5-7 | Schottky diode, small symbol |
| H1,H8 | NGFF-Mount | |
| J1 | POWSW | |
| J2,J8 | Conn_01x12_Pin | |
| J4,J21 | 1-2199230-6 | |
| J5 | SYSCTL | |
| J6 | USB_INT1 | |
| J7 | PWR | |
| J9 | Conn_01x14_Pin | |
| J10 | DISP | |
| J11 | BAT1 | Generic connector, single row, 01x07, script generated |
| J12 | BAT2 | Generic connector, single row, 01x07, script generated |
| J14 | USB_INT2 | |
| J15 | SM03B-SRSS-TB | |
| J16,J17 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
| J18,J20 | Conn_01x20 | |
| J19 | SER | |
| L1 | 12uH | |
| L2,L5 | 3.3uH | |
| L3,L4 | 2.2uH | ja so Spule halt |
| R1,R2,R37,R39,R49,R50 | 4.7k | |
| R3,R14,R17,R25,R29,R36,R66,R67,R72,R73,R77,R78,R80,R83,R84,R86,R90,R99-R101,R103,R104 | 10k | Resistor, small symbol |
| R4,R5,R15,R35 | 47k | |
| R6,R21,R38,R42,R45-R48,R52,R54,R58,R59,R64,R68,R70,R71,R74,R79,R81,R91,R92,R95,R97,R98,R102 | 0 | Resistor, small symbol |
| R7 | 33 | Resistor, small symbol |
| R8-R13,R56,R57,R60,R61 | 270 | Resistor, small symbol |
| R16,R19,R27,R28,R41,R51,R53,R55,R65 | 1k | |
| R18,R31 | 4.99k | |
| R22 | 12k 1% | |
| R23,R26,R75,R76,R94 | 100k | Resistor, small symbol |
| R24 | 24.9k | |
| R30 | 43.2k | |
| R32,R33 | 27.4 | |
| R34,R69 | 1M | |
| R43,R44,R62,R63 | 49.9 | |
| R85 | 2 | Resistor, small symbol |
| R87 | 2.2k | Resistor, small symbol |
| R88 | 27k | Resistor, small symbol |
| R89 | 100 | Resistor, small symbol |
| R93 | 127k | Resistor, small symbol |
| R96 | 15k | Resistor, small symbol |
| SW1 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW2 | SYS_RESET | |
| TP3 | TestPoint | test point |
| Y1 | 12MHz 10pF | |
| Y2 | 24MHz | |
| Y3 | 25MHz | |
| Y4 | 32.768 kHz |