gametank
clydeshaffer
design files for the gametank hardware implementation
Components (16)
| Reference | Value | Description |
|---|---|---|
| U2,U4 | 74HC573 | 8-bit Latch 3-state outputs |
| U3 | 74HC688 | 8-bit magnitude comparator |
| U5 | 74HC03 | Quad 2-input NAND open collector |
| U6 | 74HC04 | Hex Inverter |
| U8 | TS12A4515P | Single SPST Monolithic LC²MOS Analog Switch, normally OFF, 25Ohm Ron, DIP-8 |
| U9 | 74HC74 | Dual D Flip-flop, Set & Reset |
| U11 | 74HC32 | Quad 2-input OR |
| CONNPS2 | Mini-DIN-6 | 6-pin Mini-DIN connector |
| D1 | LED | Light emitting diode |
| InRegHigh1,InRegLow1 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| OutRegHigh1,OutRegLow1 | 74HC165 | Shift Register, 8-bit, Parallel Load |
| PacketClockHigh1,PacketClockLow1 | 74HC164 | 8-bit serial-in parallel-out shift register |
| ParityGen1 | 74HC280 | Parity Generator/Checker |
| R1-R6 | R_US | Resistor, US symbol |
| RN1 | R_Network08 47k | 8 resistor network, star topology, bussed resistors, small symbol |
| SW1 | SW_DIP_x08 | 8x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |