Loading design…
cnlohr
My dumping grounds for all my kicad projects and random hardware bringup.
| Reference | Value | Description |
|---|---|---|
| Q1-Q7 | AO3401A-P | P-MOSFET transistor, gate/source/drain |
| Q8-Q13 | 2N7002 | N-MOSFET transistor, gate/source/drain |
| U2 | OPA567 | |
| U3 | CH32V305GBU6 | |
| U4 | TLV9001IDCKR-TUDI | Low-power, Rail-to-Rail, 1MHz Operational Amplifier, SOT-353 |
| U5,U6 | XC6206P332MR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U7 |
| Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| C1,C3,C4,C7,C10,C12,C15-C17,C19-C21,C23,C31 | 100n | Unpolarized capacitor |
|---|
| C2,C5,C6,C8,C9,C11,C13,C14,C18,C22 | 10u | Unpolarized capacitor |
|---|
| C24-C30,C32-C35 | 10p | Unpolarized capacitor |
|---|
| D1,D2 | D_Schottky | Schottky diode |
|---|
| J1 | PGM | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | USB_C_Receptacle_USB2.0 |
|---|
| J3 | PWR | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1 | 100m | Resistor |
|---|
| R2 | 1 | Resistor |
|---|
| R3 | 10 | Resistor |
|---|
| R4 | 100 | Resistor |
|---|
| R5 | 1k | Resistor |
|---|
| R6 | 10k | Resistor |
|---|
| R7,R8,R36 | 22 | Resistor |
|---|
| R9,R16-R31,R33-R35 | 5.1k | Resistor |
|---|
| R10-R15,R32 | 200k | Resistor |
|---|
| TP1 | A3P | test point |
|---|
| TP2,TP5 | A3N | test point |
|---|
| TP3 | A4N | test point |
|---|
| TP4 | A4P | test point |
|---|
| Y1 | 8MHz | Four pin crystal, GND on pins 2 and 4, small symbol |
|---|