Loading design…
cybloxyz
RFID music player, modification or improvitation from juukebox by ananords (instructables)
| Reference | Value | Description |
|---|---|---|
| U1 | DM-OLED096-636 | |
| U2 | DFR0299 | Dfplayer - a Mini Mp3 Player |
| U3 | ESP32-S3-ZERO | RF Module, ESP32-C6 SoC, Wi-Fi 802.11b/g/n/ax, Bluetooth, BLE, Zigbee, Thread, 32-bit, 3.3V, SMD, onboard antenna |
| U4 | TP4056-42-ESOP8 | 1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8) |
| U6 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| BT1 | Battery | Multiple-cell battery |
| C1,C2 | 1uF | Unpolarized capacitor |
| C4 | 10uF | Unpolarized capacitor |
| J2 | USB_C_Receptacle_PowerOnly_6P | USB Power-Only 6P Type-C Receptacle connector |
| J3 | AudioJack3_Ground_Switch | Audio Jack, 3 Poles (Stereo / TRS), Grounded Sleeve, Switched Poles (Normalling) |
| LS1 | Speaker | Speaker |
| R1,R4 | 5.1k | Resistor |
| R2,R3 | 1k | Resistor |
| RV1 | R_Potentiometer | Potentiometer |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW3 | SW_SPDT | Switch, single pole double throw |