PiPortable
da-penguin-guy
Components (43)
| Reference | Value | Description |
|---|---|---|
| Module1 | ComputeModule5-CM5 | RaspberryPi Compute module 5 |
| Q1,Q2 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| Q9,Q10 | CSD17577Q3A | 35A Id, 30V Vds, NexFET N-Channel Power MOSFET, 4.0mOhm Ron, Qg Typ 12nC, VSON-8 3.3x3.3mm |
| U1,U2 | TPD4EUSB30 | 4-Channel ESD Protection for Super-Speed USB 3.0 Interface, USON-10 |
| U3 | MagJack-A70-112-331N126 | |
| U4 | PINA780BIDEKR | |
| U5 | USB2514B_Bi | USB 2.0 Hi-Speed Hub Controller |
| U6 | MCP23017_ML | 16-bit I/O expander, I2C, interrupts, w pull-ups, QFN-28 |
| U7-U11,U13 | 74HC4051 | 8-channel analog multiplexer/demultiplexer, DIP-16/SOIC-16/TSSOP-16 |
| U16 | TPS25730SRSMR | |
| C1,C2 | 100nF | Unpolarized capacitor |
| C33 | 4.7uF | Unpolarized capacitor |
| D1,D3 | LED Green | Light emitting diode |
| D2 | LED Red | Light emitting diode |
| D5-D9 | KT-0603R | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0 | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J3,J27 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J4 | USB3_A | USB 3.0 A connector |
| J5,J7 | Conn_01x22_Female | Generic connector, single row, 01x22, script generated |
| J6,J8 | HDMI_A_1.4 | HDMI 1.4+ type A connector |
| J9 | THD-02-R | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Raspberry_Pi_2_3 | expansion header for Raspberry Pi 2 & 3 |
| J11 | JST_SHBM04B-SRSS-TB | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | Conn_02x08_Odd_Even | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | RTC Connector | Generic connector, single row, 01x02, script generated |
| J14 | Bus_M.2_Socket_M | M.2 Socket 3 Mechanical Key M |
| J15 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J16,J17,J26,J28,J29 | Conn_01x12_Pin | Generic connector, single row, 01x12, script generated |
| J18,J20,J22,J24 | Conn_02x10_Odd_Even | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J19,J21,J23,J25 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| M1-M4 | M.2 Solder Nut | |
| M5 | M.2 Screw | |
| R1 | 2.2K 1% | Resistor |
| R2 | 1kΩ | Resistor, US symbol |
| R3,R7,R36-R39,R41 | 50Ω | Resistor, US symbol |
| R4,R5 | 470Ω | Resistor, US symbol |
| R6 | 1k | Resistor |
| R8 | 12kΩ | Resistor, US symbol |
| R40 | 100kΩ | Resistor, US symbol |
| TP2-TP5,TP13-TP18 | TestPoint_Small | test point |
| TP6,TP19 | TestPoint | test point |
| X1 | ASEK-32.768KHZ-L-R-T | 3.3V CMOS SMD Crystal Clock Oscillator, Abracon |
| Y1 | ABM8-24.000MHZ-D1G-T | Four pin crystal, GND on pins 2 and 4 |