icarus-hardware
daedalus-ind
Hardware of the onboard flight computer for the Icarus rocket.
Components (45)
| Reference | Value | Description |
|---|---|---|
| Q1 | DMG2305UX | -5A Id, -20V Vds, P-Channel MOSFET, SOT-23 |
| Q2 | Si7232DN | 10A Id, 20V Vds, 164mOhm Ron, PowerPAK-8 |
| U1 | STM32F405RGT6 | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 192KB RAM, 168 MHz, 1.8-3.6V, 51 GPIO, LQFP64 |
| U2 | W25Q128JVSIQ | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | TPS3831G33DQNR | 150-nA, Ultralow Power, Supply Voltage Monitor, X2SON-4 |
| U5 | TPS631000 | Buck-Boost Converter, 1.6-5.5V Input Voltage, 1.5A Switch Current, Adjustable 1.2-5.3V Output Voltage, VSON-10 |
| U6 | ICM-45686 | Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output |
| U7 | ADXL375 | 3-Axis MEMS Accelerometer, 200g range, I2C/SPI, LGA-14 |
| U8 | LIS2MDL | Ultra-low-power, 3-axis digital output magnetometer, LGA-12 |
| U9 | MS5607-02BA | Barometric pressure sensor, 20cm resolution, 10 to 1200 mbar, I2C and SPI interface up to 20MHz, LGA-8 |
| U10 | NEO-M9N-00B | GNSS Module NEO M8, VCC 2.7V to 3.6V |
| U11 | E220-900T22S | 22dBm ISM band 850.125~930.125MHz LoRa radio module |
| C1,C20,C23,C29,C35 | 10u | Unpolarized capacitor |
| C2-C6,C10,C15-C18,C21,C22,C24-C28,C30,C31,C34,C36,C37 | 100n | Unpolarized capacitor |
| C7,C8,C33,L1 | 1u | Inductor,Unpolarized capacitor |
| C9 | 10n | Unpolarized capacitor |
| C11,C12 | 10p | Unpolarized capacitor |
| C13,C14 | 2u2 | Unpolarized capacitor |
| C19 | 47u | Unpolarized capacitor |
| C32 | 220n | Unpolarized capacitor |
| D1,D2,D4 | RED | Light emitting diode |
| D3 | SS14 | 40V 1A Schottky Diode, SMA |
| D5-D8 | PESD3V3L1BA | Bidirectional transient-voltage-suppression diode |
| FB1 | 120R | Ferrite bead |
| J1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J2 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J3,J7 | JST PH 2.0 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J5 | SMA | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J6 | Screw_Terminal_01x06 | Generic screw terminal, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L2 | 27n | Inductor |
| R1,R2 | 22R | Resistor |
| R3,R4,R22,R26 | 10k | Resistor |
| R5,R14,R18,R20,R24 | 1k | Resistor |
| R6-R9 | 2k | Resistor |
| R10,R11 | 5k1 | Resistor |
| R13 | 511k | Resistor |
| R15 | 91k | Resistor |
| R16,R19,R23 | 100k | Resistor |
| R17 | 10R | Resistor |
| R21,R25 | 27k | Resistor |
| R27-R30 | 47R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |