Loading design…
| Reference | Value | Description |
|---|---|---|
| IC3 | ISO1042BDWVR | Isolated CAN Transceiver With 70-V Bus Fault Protection and Flexible Data Rate |
| IC6 | MCP2515-e_ST | CAN controller with SPI, 125 degC |
| IC10 | SN74LXCH8T245PWR | Translation - Voltage Levels 8-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs 24-TSSOP -40 to 125 |
| A1 | RaspberryPi_Pico | Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2 |
| C37-C42 | UVY1E102MPD1TD | Cap Aluminum Lytic 1000uF 25V 20% (10 X 16mm) Radial 5mm 610mA 1000h 105C Ammo |
| C65,C85,C89,C92,C120,C121 | 100nF | Unpolarized capacitor |
| C66,C86,C90,C91 | 10uF | Unpolarized capacitor |
| C67,C68,C93-C95 | 22pF | Unpolarized capacitor |
| FL1 | ACT45B-101-2P-TL003 | Common Mode Filters / Chokes, |Z|=5800 at 10MHz, L x W x T : |
| J1 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| JP1 | Jumper_2_Open | Jumper, 2-pole, open |
| PS1 | RKE-1205S_H | Recom Through Hole 1W Isolated DC-DC Converter, Vin Maximum of 12 V dc, I/O isolation 4kV dc, Vout 5V dc |
| PS2 | R-78K3.3-1.0 | 1.0 Amp SIP3 Single Output |
| PS3 | RFMM-0505S | Isolated DC/DC Converters 1W 5Vin 5Vout 200mA SIP7 |
| R59,R81,R82 | 4.7k | Resistor |
| R60 | 120 | Resistor |
| Y1 | 8MHz | Two pin crystal |