ece477-skee-ball
dfall33
ECE477 Team 01 Project
Components (35)
| Reference | Value | Description |
|---|---|---|
| U1 | D24V22F6 | |
| U2 | MAX98357A | Mono DAC with amplifier, I2S, PCM, TDM, 32-bit, 96khz, 3.2W, TQFP-16 |
| U3 | D24V22F5 | |
| U4 | STM32F091RCTx | STMicroelectronics Arm Cortex-M0 MCU, 256KB flash, 32KB RAM, 48 MHz, 2.0-3.6V, 52 GPIO, LQFP64 |
| U5,U6 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U7 | 74LS08 | Quad And2 |
| U11 | MAX7375AXR805 | Silicon Clock Oscillator 8MHz, SC-70-3 |
| U13 | LD1117S33TR_SOT223 | 800mA Fixed Low Drop Positive Voltage Regulator, Fixed Output 3.3V, SOT-223 |
| C1 | 10nF | Unpolarized capacitor |
| C2 | 1uF | Unpolarized capacitor |
| C3,C4,C6,C10,C12,C14,C16 | 100nF | Unpolarized capacitor |
| C7 | 10uF | Unpolarized capacitor |
| C11,C17 | 4.7uF | Unpolarized capacitor |
| D1-D9 | LED | Light emitting diode |
| D10-D17 | D_Schottky | Schottky diode |
| FB1 | FerriteBead | Ferrite bead |
| J2 | EXTERNAL_BUTTON | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | NHD_CONN1 | Generic connector, double row, 02x06, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Barrel_Jack | DC Barrel Jack |
| J5 | NHD_CONN2 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | HEADER | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J18 | DC_DRIVER | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J19 | JOYSTICK | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J20 | SERVO | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J21 | US0 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J22 | US1 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J26 | US2 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J27 | US3 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J36 | US4 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2,RV1 | 10k | Potentiometer,Resistor |
| R3-R8,R11 | 150 | Resistor |
| R9 | 200 | Resistor |
| R10 | 300 | Resistor |
| R16 | 2200 | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |