Loading design…
fredch16
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | ICM-20602 | High performance 6-Axis MEMS motion tracking, SPI/I2C interface, LGA-16 |
| C1,C2 | 10uF | Unpolarized capacitor |
| C3,C4,C8 | 100nF | Unpolarized capacitor |
| C5 | 100uF | Unpolarized capacitor |
| C6 | 1uF | Unpolarized capacitor |
| C7 | 2.2µF | Unpolarized capacitor |
| C9 | 10nF | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2 | 5.1k | Resistor |
| R3 | 10k | Resistor |
| R4,R5 | 1k | Resistor |
| R6,R7 | 4.7k | Resistor |
| S2,S3 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SW1 | SW_Push | Push button switch, generic, two pins |