Loading design…
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | ZVP2106A | DMOS FET P-ch 280mA 60V E-Line |
| U1-U5 | GAL16V8 | Programmable Logic Array, DIP-20/SOIC-20/PLCC-20 |
| U6 | 74LS74 | Dual D Flip-flop, Set & Reset |
| U7,U9 | AT29C010A-90JI | Fast Read Access Time 70 ns 5-volt Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (128 Bytes/sector) Internal Address and Data Latches for 128 Bytes Two 8K Bytes Boot Blocks with Lockout Internal Program Control and Timer Hardware and Software Data Protection Fast Sector Program Cycle Time 10 ms DATA Polling for End of Program Detection Low Power Dissipation 50 mA Active Current 100 A CMOS Standby Current T |
| U8,U10 | IS61C5128AS-25QLI | SRAM 4Mb,High-Speed,Low Power,Async,512K x 8,25ns,5v,32 Pin SOP (450 mil), RoHS |
| U11 | MC1455B | Timer, 555 compatible, SOIC-8 |
| C1 | 10uF | Polarized capacitor |
| C2-C5,C7-C10 | C | Unpolarized capacitor |
| C6 | 1uF | Polarized capacitor |
| CN1 | ECC43DCAI-S189 | CONN EDGE DUAL FMALE 86POS 0.100 |
| D1,D2 | LED | Light emitting diode |
| D3 | D | Diode |
| R1-R4,R6 | 1k | Resistor |
| R5 | 4.7k | Resistor |
| R7 | R | Resistor |
| R8 | 220R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_Wuerth_450301014042 | Switch slide, single pole double throw |
| VR1 | RV09AF-40-20K-B1M | Potentiometers 20mm Linear 1MM |