kubisat
gredzikk
Hardware and software of cubesat model for engineering thesis
Components (22)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | DS3231M | Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 |
| U3 | NEO-6M-GPS | |
| U4 | XL1278-SMT | |
| U6 | Pico | |
| AE1 | Antenna | Antenna |
| BT1 | LIR2023 | Single-cell battery |
| C1,C2 | 10u | Polarized capacitor |
| C16 | 100n | Unpolarized capacitor |
| J1 | DEBUG_SWD | Generic connector, single row, 01x03, script generated |
| J2 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
| J3 | UART0 | Generic connector, single row, 01x03, script generated |
| J4 | POWER_IN | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | IPX | small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J6 | POWER | Generic connectable mounting pin connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | I2C1 | Generic connectable mounting pin connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | SPI0 | Generic connectable mounting pin connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 27uH | Inductor |
| R1-R6 | 4k7 | Resistor |
| R7-R10 | 10k | Resistor |
| R11 | 22 | Resistor |
| SW2 | RESET | Push button switch, generic, two pins |