Loading design…
greghulette
| Reference | Value | Description |
|---|---|---|
| IC1,IC2 | E22-900M22S | |
| U1,U5 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U2,U6 | ESP32-S3-MINI-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, SMD, onboard antenna |
| U3,U7 | BQ24074RGT | USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16 |
| U4,U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| C1,C3,C5-C7,C12,C14,C19,C21,C23-C25,C30,C32 | 100nf | Unpolarized capacitor |
| C2,C8,C20,C26 | 22uf | Unpolarized capacitor |
| C4,C9,C15,C22,C27,C33 | .1uf | Unpolarized capacitor |
| C10,C11,C13,C16,C17,C28,C29,C31,C34,C35 | 1uf | Unpolarized capacitor |
| C18,C36 | 10uf | Unpolarized capacitor |
| D1-D6 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| E1,E2 | ANT-915-USP410 | |
| J1,J3 | USB4105-GF-A | |
| J2,J4 | S2B-PH-SM4-TB_LF__SN_ | |
| R1,R16 | DNP | Resistor |
| R2,R4,R8,R13,R14,R17,R19,R23,R28,R29 | 10K | Resistor |
| R3,R6,R7,R18,R21,R22 | 330 | Resistor |
| R5,R20 | 3352T-1-103LF | |
| R9,R24 | 17.8K | Resistor |
| R10,R25 | 1.62K | Resistor |
| R11,R26 | 1.8K | Resistor |
| R12,R15,R27,R30 | 5.1K | Resistor |
| S1,S2 | RKJXV122400R | Multi Control Devices Potentiometer Type ThumbPointer (Stick Controller) RKJXV Series |
| SW1-SW8,SW12-SW19 | SW_Push | Push button switch, generic, two pins |
| SW9,SW20 | Reset | Push button switch, generic, two pins |
| SW10,SW21 | Boot | Push button switch, generic, two pins |
| SW11,SW22 | PCM12SMTR |