electronic-schemas
ilDug
Raccolta di schemi elettronici per Arduino
Components (38)
| Reference | Value | Description |
|---|---|---|
| Q1 | TIP32 | -6A Ic, -40V Vce, Power PNP Transistor, TO-220 |
| Q2 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q3 | Q_NMOS | N-MOSFET transistor |
| U1 | LM78M05_TO220 | Positive 500mA 35V Linear Regulator, Fixed Output 5V, TO-220 |
| U2 | LM317_TO-220 | 1.5A 35V Adjustable Linear Regulator, TO-220 |
| U3 | Atmega328p-Arduino | Atmega328p with Arduino UNO pin mapping(MCU in ArduinoUNO) |
| C0.1 | 470uF | Polarized capacitor, US symbol |
| C0.2,C3,C5 | 200uF | Polarized capacitor, US symbol |
| C1 | 330pF | Unpolarized capacitor |
| C2,C4,CZ1 | 100pF | Unpolarized capacitor |
| C6 | 1uF | Unpolarized capacitor |
| C7 | 10nF | Unpolarized capacitor |
| C8 | 100nF | THT Ceramic Disc Capacitor, 5.0mm Diameter, 2.5mm Width, 5.00mm Pitch, Alternate KiCad Library |
| C9,C10 | 22pF | capacitor, non-polarized/bipolar |
| C_{adj}1 | 10uF | Unpolarized capacitor |
| D1-D3 | 1N4002 | Diode |
| D4 | LED | Light emitting diode |
| D5,D6 | D | Diode |
| DZ1 | 9V1 | Zener diode |
| F1 | Fuse | Fuse |
| J1 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J2,J3 | FT232 | Generic connector, single row, 01x05, script generated,Generic connector, single row, 01x06, script generated |
| K1 | SANYOU_SRD_Form_C | Sanyo SRD relay, Single Pole Miniature Power Relay, |
| M1 | Motor_DC | DC Motor |
| P1 | +12V | Pad per saldature dirette sulla PCB |
| R1 | 1.5R | Resistor |
| R2,R3 | 10k | Resistor |
| R4,Radj1 | 330R | Resistor |
| R5,R6 | 1kR | Resistor |
| R7 | R | Resistor |
| R8 | 100kR | Resistor |
| R9 | 10kR | Resistor |
| Radj2 | 2kR | Resistor |
| RZ1,RZ3 | 10R | Resistor |
| RZ2 | 5R | Resistor |
| R_{PU}1,R_{PU}2 | 5kR | Resistor |
| SW3 | SW_Push | Push button switch, generic, two pins |
| Y1 | Crystal_16MHz | 16Mz Crystal |