homectrl-sys
jeevan9s
home automation controller
Components (66)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3407A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| Q2 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| Q3-Q5 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | TPS5405DR | Buck Converter IC (Fixed Vout 5V) |
| U2 | MCP1826S | 1000mA, Low-Voltage, Low Quiescent Current LDO Regulator, SOT-223, TO-220, TO-263 |
| U3 | DMP4065S-7 | |
| U4 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U5 | TMC2209 | |
| U7 | TPD4E001DRLR | |
| U8 | TPD2E001DRLR | |
| U9 | SI2347DS-T1-GE3 | |
| UE1,UE2 | ID_LM66100DCKR | ID Diodes |
| BZ1 | CMT-0525-75-SMT-TR | |
| C1,C34 | 100uF | Polarized capacitor |
| C2,C3,C11,C16,C22,C23 | 10uF | Unpolarized capacitor |
| C4 | 10nF | Unpolarized capacitor |
| C5,C7,C9,C10,C12,C14,C15,C17-C21,C24-C32,C35-C37,C39,C41,C43 | 0.1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C6,C13,C42,C44 | 22uF | Unpolarized capacitor |
| C8 | 3.3nF | Unpolarized capacitor |
| C38 | 22nF | Unpolarized capacitor, small symbol |
| C40 | 2.2uF | Unpolarized capacitor |
| D1 | SMAJ14A | |
| D2,D7 | PLUG_LED | Light emitting diode (GREEN) |
| D3 | MMSZ5243BT1G | Zener diode |
| D4 | SS34 | |
| D5,D9 | SS14 | Diode |
| D6 | USB_LED | Light emitting diode (GREEN) |
| D8 | 3V3_LED | Light emitting diode (GREEN) |
| D10 | ON_LED | Light emitting diode (GREEN) |
| D11 | DBG_LED | Light emitting diode (BLUE) |
| D12 | WIFI_LED | Light emitting diode (YELLOW) |
| D13 | BAT54J | 30V 200mA Schottky diode, SOD-323F |
| D15 | VPMP_LED | Light emitting diode (GREEN) |
| F1 | 3A 24V PTC | |
| FB1 | FerriteBead | 80 ohm 4 A |
| J1 | Barrel_Jack | DC Barrel Jack |
| J2 | PUMP1_CONN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | PUMP2_CONN | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | STEP_CONN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | USB_C_CONN | USB-C Connector |
| J6 | SMS1_CONN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | ALS_CONN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | FSW1_CONN | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 10uH | 10uH 5 |
| R1,R34,R35 | 4.7k | Resistor |
| R2,R8 | 100k | Resistor |
| R3 | 50k | Resistor |
| R4-R6,R9,R14,R19,R23,R25,R26,R28,R33 | 10k | Resistor |
| R7,R13,R15-R18,R22,R24,R36 | 150 | Resistor |
| R10 | 470 | Resistor |
| R11 | 20K | |
| R12,R37 | 1.8K | Resistor |
| R20,R21 | 5.1k | Resistor |
| R27,R31,R32,R39,R40 | 1k | Resistor |
| R29,R30 | 0.11 | Resistor |
| SW1 | S3_RESET_SW | Push button switch, generic, two pins |
| SW2 | S3_BOOT_SW | Push button switch, generic, two pins |
| TP1 | GND_TP_PAD | test point |
| TP2 | 3V3_TP_PAD | test point |
| TP3 | GND_TP_DRILL | test point |
| TP4 | 5V_USB_TP_PAD | test point |
| TP5 | VPLUG_TP_DRILL | test point |
| TP6 | 5V_BATT_TP_PAD | test point |
| TP7 | VPLUG_TP_PAD | test point |
| TP8 | 5V_MUX_TP_PAD | test point |
| TP9 | GND_B_PAD | test point |