MACK-10
joehanko
Mini Tensile Tester Project
Components (40)
| Reference | Value | Description |
|---|---|---|
| Q2 | MMBT3906 | -0.2A Ic, -40V Vce, Small Signal PNP Transistor, SOT-23 |
| U1 | U1 ESP32_DEVKIT_30P | |
| U2,U6 | HX711 | 24-bit Analog-to-Digital Converter (ADC) for Weight Scales, SOIC-16 (SOP-16) |
| U3 | TMC2208 | |
| U4 | LM2596 Buck Converter | |
| C1 | 100uF 35V | Polarized capacitor |
| C2 | 100nF 50V | Unpolarized capacitor |
| C3,C4,C6,C7,C9 | 0.1uF | Unpolarized capacitor |
| C5,C8 | 10uF | Unpolarized capacitor |
| D1 | POWER | Light emitting diode |
| D2 | STATUS | Light emitting diode |
| F1 | 2A Fuse | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1 | Motor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | MCU | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Load Cell | |
| J4 | 24V IN | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | SSD1306 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | INPUT | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | E_STOP | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | LIM_TOP | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | LIM_BOT | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | I/O | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | CHANNEL_B | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | LOAD_CELL | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | FUSE_BYPASS | Jumper, 2-pole, open |
| L1 | 3.3uH | Inductor |
| R1,R4 | 1k | Resistor |
| R2,R3,R9 | 10k | Resistor,Resistor, US symbol |
| R5,R6 | 100 | Resistor, US symbol |
| R7 | 8.2k | Resistor, US symbol |
| R8 | 20k | Resistor, US symbol |
| TP1 | 3V3 | test point |
| TP2 | HXDT | test point |
| TP3 | 5VOUT | test point |
| TP4 | GND | test point |
| TP5 | 24V | test point |
| TP6 | HXSCK | test point |
| TP7 | EN | test point |
| TP8 | STEP | test point |
| TP9 | SDIR | test point |