Footprint-Audit
josin-1
Automatic (KiCAD) Footprint and Symbol Audit Creator
Components (25)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2,Q4-Q6,Q9 | BC817 | NPN transistor, base/collector/emitter |
| Q3 | IRLML6401 | -4.3A Id, -12V Vds, 50mOhm Rds, P-Channel MOSFET, SOT-23 |
| Q7,Q8 | 2N7002P | N-MOSFET; Trench; unipolar; 60V; 0,28A; Idm: 1,2A; 420mW |
| U1,U3,U4 | AP2125N-3.0TRG1 | LDO-Voltage Regulator SMD; 3V; 0.3V |
| U2 | STM32F411VET6 | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 81 GPIO, LQFP100 |
| C1-C3,C5,C15,C18,C19,C22,C23 | 1uF | Polarized capacitor,Unpolarized capacitor |
| C4,C6-C10,C13,C14,C16,C17,C20,C21 | 100nF | Unpolarized capacitor |
| C11,C12 | 2.2uF | Unpolarized capacitor |
| D1 | LED Green | Light emitting diode |
| D2,D4 | LED Red | Light emitting diode |
| D3,D6 | IP4220CZ6_125 | TVS DIODE 5.5V 6TSOP |
| FB1 | FerriteBead | Ferrite bead |
| J1 | USB4105-GF-A-120 | USB Type-C 2.0 Receptacle connector 16-Pin |
| J2 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | TF-Push | Micro SD Card Socket with one card detection pin |
| R1,R8,R9,R23 | 220E | Resistor |
| R2 | 330E | Resistor |
| R3,R6,R17,R18 | 5k1 | Resistor |
| R4,R5,R12,R16,R24 | 2k2 | Resistor |
| R7 | 47E | Resistor |
| R10,R14,R19-R22 | 10k | Resistor |
| R11,R13,R15 | 1k | Resistor |
| XU1 | NEXTION Display Interface | JST-XH 4P Connector |
| Y1 | ECS-2520MV-080-CN-TR | HCMOS Crystal Clock Oscillator, 2.5x2.0 mm SMD, 8 Mhz |
| Y2 | ECS-327MVATX-3-CN-TR | SMD MultiVolt Crystal Oscillator 32.768 kHz |