localization-io
kayneyao
A breakout board for the LSM6DSL 6 axis accel-gyro combo and the LIS2MDL 3 axis mag
Components (24)
| Reference | Value | Description |
|---|---|---|
| U1 | LSM6DSL | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope, 1.71V to 3.6V VCC |
| U2 | LIS2MDL | Ultra-low-power, 3-axis digital output magnetometer, LGA-12 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| C1,C2,C6-C8,C11,C13,C14 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C3 | 220nF | Unpolarized capacitor, small symbol |
| C4,C12 | 10uF | Unpolarized capacitor, small symbol |
| C5,C9 | 22uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C10 | 1uF | Unpolarized capacitor |
| D1 | D_Schottky | Schottky diode |
| D2 | D_TVS0 | Bidirectional transient-voltage-suppression diode |
| D3 | LED | Light emitting diode |
| D4,D5 | D_TVS1 | Bidirectional transient-voltage-suppression diode |
| FB1 | FerriteBead_Small | Ferrite bead, small symbol |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J3 | JST_PH2.0_01x04 | Generic connector, single row, 01x04, script generated |
| J4 | GPIO0 | Generic connector, single row, 01x06, script generated |
| J5 | GPIO1 | Generic connector, single row, 01x06, script generated |
| R1 | 270R | Resistor, small symbol |
| R2,R3,R6 | 10kR | Resistor,Resistor, small symbol |
| R4,R5 | 5.1kR | Resistor |
| R7 | 100R | Resistor |
| R8,R9 | 2.2kR | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |