WellD
kinggh0stee
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support
Loading design…
kinggh0stee
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support
| C3,C5,C10,C12,C24 | 1uF |
|---|
| C4,C6,C15-C19,C28,C29 | 10uF |
|---|
| C7-C9,C11,C13,C21,C23,C25,C30-C33 | 100nF |
|---|
| C20 | 22uF 25V |
|---|
| C22 | 10uF 25V |
|---|
| C27 | 4.7uF |
|---|
| C34,C35 | 10nF |
|---|
| D1,D12 | PRTR5V |
|---|
| D4 | Status |
|---|
| D5 | AO3407 |
|---|
| D6 | MBRS140 |
|---|
| D7 | LED |
|---|
| D8,D14 | SMAJ28CA |
|---|
| D9,D10 | SMAJ3.3 |
|---|
| D11 | SMAJ13 |
|---|
| D13 | SMAJ10CA |
|---|
| F2 | Polyfuse |
|---|
| FB1 | Ferrite |
|---|
| J1 | XT30PW-F |
|---|
| J3 | 132289 |
|---|
| J4 | 4-20mA_1 |
|---|
| J5 | 4-20mA_2 |
|---|
| J6 | DS18B20 |
|---|
| J7 | Spare |
|---|
| J8 | I2C |
|---|
| J9 | GPIO |
|---|
| J10 | PROG |
|---|
| J12 | Solar |
|---|
| J13 | USB-C |
|---|
| L1,L2 | 4.7uH |
|---|
| R2-R5,R28 | 100R |
|---|
| R6,R9,R10,R26,R37,R38 | 4k7 |
|---|
| R7 | 330k |
|---|
| R8,R24,R34,R36 | 100k |
|---|
| R11-R13,R21,R31 | 10k |
|---|
| R14 | 1k |
|---|
| R19 | 2k0 |
|---|
| R20 | 36k |
|---|
| R22 | 1k DNF |
|---|
| R23 | 1.91M |
|---|
| R32 | 33R |
|---|
| R33 | 604k |
|---|
| R35 | 1k2 |
|---|
| R50,R51 | 5k1 |
|---|
| SJ1 | VBOOST |
|---|
| SJ2,TP2 | VLOOP |
|---|
| SJ3 | LED_DIS |
|---|
| SJ4 | UART_TX |
|---|
| SJ5 | UART_RX |
|---|
| SW1 | RESET |
|---|
| SW2 | BOOT |
|---|
| TP1 | VBAT |
|---|
| TP3 | +3V3 |
|---|
| TP4 | GND |
|---|
| TP5 | LOOP1 |
|---|
| TP6 | LOOP2 |
|---|
| TP7 | 1WIRE |
|---|
| TP8 | SDA |
|---|
| TP9 | SCL |
|---|
| TP10 | VSOLAR |
|---|
| TP11 | VBAT_RAW |
|---|
| TP12 | ADS_DRDY |
|---|
| TP14 | CHRG_SOL |
|---|
| TP15 | CHRG_USB |
|---|