Loading design…
kwiecinski
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors. It show informations od displays and use ESPhome to send it to Home Assistant..
| Reference | Value | Description |
|---|---|---|
| MOD1 | LM2596-Step-Down | |
| Q1-Q5,Q8 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q6,Q7 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | PCF8574 | 8 Bit Port/Expander to I2C Bus, DIP/SOIC-16 |
| U2 | ST485 | Half duplex RS-485/RS-422, 5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 256 transceiver on the bus - 40 to 85 °C, SOIC-8 |
| U3 | AMS1117-5.0 |
| 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U4 | ESP32_DevKit_V1_DOIT | 32-bit microcontroller module with WiFi and Bluetooth |
|---|
| U5 | UP7760 |
|---|
| U6 | MAX3232 | 3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors |
|---|
| U7,U8 | ST485EBDR | Half duplex RS-485/RS-422, 5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 256 transceiver on the bus - 40 to 85 °C, SOIC-8 |
|---|
| U9 | 74HC14 | Hex inverter schmitt trigger |
|---|
| U10,U13 | ADUM3211ARZ |
|---|
| U11 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
|---|
| U12,U15 | B0505S-1W |
|---|
| C1,C3,C4,C6,C8,C9,C11-C13,C16-C20,C22,C24,C26,C28,C30,C32 | 100n | Unpolarized capacitor |
|---|
| C2 | 100u | Polarized capacitor |
|---|
| C5,C7 | 22u | Polarized capacitor |
|---|
| C10 | 47u | Polarized capacitor |
|---|
| C14,C15 | 10n | Unpolarized capacitor |
|---|
| C21,C23,C27,C29 | 10u | Unpolarized capacitor |
|---|
| D1 | 1N4148 |
|---|
| D5,D6,D15-D18 | LESD5D5.0CT1G-MS | Bidirectional transient-voltage-suppression diode |
|---|
| D11,D12 | LL4148 | 100V 0.15A standard switching diode, MiniMELF |
|---|
| F1 | 2A | Resettable fuse, polymeric positive temperature coefficient |
|---|
| F2 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
|---|
| J1 | OR-OR SMOKE SENSOR | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | LCD_DISP | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | RS485 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | DHT22 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | DC_LINE_OUTPUT | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | DB9_Socket | 9-pin female receptacle socket D-SUB connector |
|---|
| J7 | CO_SENSOR | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | H2_SENSOR | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9,J10 | Unconnected | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J11 | METER_GRID | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J13 | METER_INTERFACES | Generic connector, double row, 02x05, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| LS1 | BUZZER |
|---|
| R1-R4,R8-R10,R16,R17,R21,R31,R32,R34,R35,R37,R38,R51-R53 | 10k | Resistor |
|---|
| R5 | 2k |
|---|
| R6,R7,R14,R18 | 0R | Resistor |
|---|
| R11,R13,R22,R25,R39,R40,R43,R45,R46,R48,R56,R57 | 1k | Resistor |
|---|
| R12,R44,R47 | 120R | Resistor |
|---|
| R15,R19,R26 | 10K | Resistor |
|---|
| R20,R23 | 100R | Resistor |
|---|
| R24 | 1k8 | Resistor |
|---|
| R27,R29 | 7k8 | Resistor |
|---|
| R28,R30 | 2k2 | Resistor |
|---|
| R33,R49,R50,R55 | 4k7/5k1 | Resistor |
|---|
| R36 | 5k1 | Resistor |
|---|
| R41,R42 | 100K | Resistor |
|---|
| R54,R58 | 4k7 | Resistor |
|---|
| SW1 | SW_Push | Push button switch, generic, two pins |
|---|