euro-rack-synth
lennartquerter
Lenimal Github for DIY for a Eurorack Synth
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U2 | STM32F411RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 50 GPIO, LQFP64 |
| C1,C3 | 47uF | Polarized capacitor |
| C2,C4 | 0.1uF | Unpolarized capacitor |
| C5,C6,C11 | 10uF | Polarized capacitor,Unpolarized capacitor |
| C7-C10,C12,C15 | 100nF | Unpolarized capacitor |
| C13,C14 | 1uF | Unpolarized capacitor |
| C16,C17 | 10pF | Unpolarized capacitor |
| C18 | 2.2uF | Unpolarized capacitor |
| D1,D2 | 1N5819 | 20V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D3 | LED | Light emitting diode |
| FB1 | 120R | Ferrite bead, small symbol |
| H1 | Conn_02x05_PWR_Eurorack | |
| J1 | BOOT_RUN | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2,R6 | 10R | Resistor |
| R3 | 2K | Resistor |
| R4,R5 | 10K | Resistor |
| Y1 | 20MHZ | Two pin crystal |