Loading design…
lfg-seth
| Reference | Value | Description |
|---|---|---|
| U1,U2 | MCP23017_ML | 16-bit I/O expander, I2C, interrupts, w pull-ups, QFN-28 |
| U3 | RP2040 | A microcontroller by Raspberry Pi |
| U4,U7 | MCP251863 | |
| U5 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U8 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U9 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U10 | W25Q128JVP | 128Mb Serial Flash Memory, Standard/Dual/Quad SPI, WSON-8 |
| C1,C3,C9,C11-C13,C17-C21,C24,C27,C36-C38 | 100nF | Unpolarized capacitor, small symbol |
| C2,C4,C10,C16,C22,C23,C25,C26,C28,C32,C34 | 1uF | Unpolarized capacitor, small symbol |
| C5,C6 | 15pF | Unpolarized capacitor, small symbol |
| C7,C8,C14,C15 | 10pF | Unpolarized capacitor, small symbol |
| C29-C31,C33,C35 | 10uF | Unpolarized capacitor, small symbol |
| J1 | DEBUG | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | CAN PCM | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Expansion | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | CAN VEH | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Front Panel | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R28 | 10k | Resistor, small symbol |
| R29,R40 | 1k | Resistor, small symbol |
| R30,R31 | 27R | Resistor, small symbol |
| R32,R36 | 0R | Resistor, small symbol |
| R33,R37 | DNP | Resistor, small symbol |
| R34,R35,R38,R39 | 60R | Resistor, small symbol |
| SW1-SW12 | B13AB | Switch, single pole double throw |
| Y1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |
| Y2,Y3 | 20MHz | Four pin crystal, GND on pins 2 and 4 |