Loading design…
lhr-solar
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.
| Reference | Value | Description |
|---|---|---|
| IC1 | LM74502HDDFR | Hot Swap Voltage Controllers 3.2-V to 65-V industrial RPP controller with load disconnect, OVP, and high gate drive |
| Q1,Q3-Q6,Q9-Q11,Q14 | IRLML0030 | 5.3A Id, 30V Vds, 27mOhm Rds, N-Channel HEXFET Power MOSFET, SOT-23 |
| Q2,Q7,Q8 | SQ2315CES-T1_GE3 | MOSFETs P-CHANNEL 12-V (D-S) 175C MOSFET |
| U1 | ESP32-C6-MINI-1/U | ESP32-C6-MINI-1 is a module that supports 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee and Thread (802.15.4) |
| U2 | TPS2115ADRBR | 2.8-5.5-V, 84-m?, 1.25-A, power mux with manual, automatic switchover and status output 8-SON -40 to 85 |
| U3 | EMC2305-1-AP-TR | |
| U8 |
| LT1963AEST-3.3#TRPBF |
| 3.3V, 1.5A, Low Noise, Fast Transient Response LDO Regulator, SOT-223 |
| U9,U10 | SN74HC594DR | 8-Bit Shift Registers With Output Registers |
|---|
| U11 | TPS5405DR | Buck Switching Regulator IC Positive Fixed 5V |
|---|
| U12 | SHT4x | Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4 |
|---|
| 5V_Buck1 | 5V_Buck | Light emitting diode |
|---|
| Array1,ArrayPre1,ESTOP1-ESTOP3,LV1-LV4,LVPWR1 | LED | Light emitting diode |
|---|
| C1-C3,C5,C14,C16,C19,C23,C27,C36 | 1u | Unpolarized capacitor,Unpolarized capacitor, small symbol |
|---|
| C4,C6,C8,C9,C12,C15,C17,C18,C22,C24,C25,C30,C34,C35,C38-C41 | 0.1u | Unpolarized capacitor |
|---|
| C7,C10,C11,C13,C21,C26,C31-C33,C37 | 10u | Unpolarized capacitor |
|---|
| C20 | 220n | Unpolarized capacitor |
|---|
| C28 | 10n | Unpolarized capacitor |
|---|
| C29 | 3.3n | Unpolarized capacitor |
|---|
| D1 | 1N5819HW-7-F | Schottky diode |
|---|
| D2 | SP0503BAHT |
|---|
| D3,D11 | PWR | Light emitting diode |
|---|
| D4-D9 | VSSAF522-M3/H | 1700V, 25A, SiC Schottky Diode, TO-247 |
|---|
| D10 | SMAF4758A | Zener diode |
|---|
| D12,D13 | TVS | Zener diode |
|---|
| D14 | DEBUG | Light emitting diode |
|---|
| D15 | ModuleFault[0] | Light emitting diode |
|---|
| D16 | ModuleFault[1] | Light emitting diode |
|---|
| D17 | ModuleFault[2] | Light emitting diode |
|---|
| D18 | ModuleFault[3] | Light emitting diode |
|---|
| D19 | ModuleFault[4] | Light emitting diode |
|---|
| D20 | WatchdogErr | Light emitting diode |
|---|
| D21 | AmpIN | Light emitting diode |
|---|
| D22 | VTempIN | Light emitting diode |
|---|
| D23 | Chrging | Light emitting diode |
|---|
| D24 | OverTemp | Light emitting diode |
|---|
| D25 | OverAmp | Light emitting diode |
|---|
| D26 | LowV | Light emitting diode |
|---|
| D27 | MBR230S1F | Schottky diode |
|---|
| D28 | Fault | Light emitting diode |
|---|
| D29 | Heart | Light emitting diode |
|---|
| D30 | OverV | Light emitting diode |
|---|
| D31 | HV- | Light emitting diode |
|---|
| D32 | HV+ | Light emitting diode |
|---|
| E_JP1-E_JP3 | Jumper_2_Open | Jumper, 2-pole, open |
|---|
| F2,F3 | 3568 | Fuse |
|---|
| F4 | SMD1812B300TFT | Polymeric PTC Resettable Fuse 6V 3 A Ih Surface Mount 1812 (4532 Metric), Concave |
|---|
| FAN1,FAN2 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J3,J10 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5,J11 | Conn_02x06_Counter_Clockwise | Generic connector, double row, 02x06, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6,J9 | ContactorConnector | Pinout for contactor connectors. |
|---|
| J8 | CarCANConnector | Connector |
|---|
| J15,J16 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J21 | SFH11-PBPC-D05-ST-BK | Connector interfacing with logic analyzers |
|---|
| L1 | 100uH | Inductor |
|---|
| LOGO1 | LHRs | Graph footprint placeholder |
|---|
| LOGO2 | Dr. Hallock | Graph footprint placeholder |
|---|
| LOGO3 | Beach | Graph footprint placeholder |
|---|
| LOGO4 | Gear | Graph footprint placeholder |
|---|
| R1,R3,R4,R9,R12,R16,R17,R19,R21-R23,R28-R31,R33,R36-R38,R40,R44,R45,R61-R63,R66,R72,R73,R77,R79,R84-R87,R91,R93,R94 | 10k | Resistor, US symbol |
|---|
| R2,R5,R13,R35,R95 | 33k | Resistor, US symbol |
|---|
| R6,R8,R20,R34,R41,R51,R67,R68,R80 | 1k | Resistor, US symbol |
|---|
| R7,R24-R27,R42,R43,R46-R50,R52-R60,R69-R71 | 470 | Resistor, US symbol |
|---|
| R10,R11 | 5.1k | Resistor, US symbol |
|---|
| R14 | 200k | Resistor, US symbol |
|---|
| R15,R32,R39,R78,R83 | 4.3k | Resistor, US symbol |
|---|
| R18 | 9k | Resistor, US symbol |
|---|
| R64 | 16k | Resistor |
|---|
| R75,R76 | 0 | Resistor, US symbol |
|---|
| SW1 | RESET | MEC 5G single pole normally-open tactile switch |
|---|
| SW2 | BOOT | Switch, single pole double throw |
|---|
| TP2,TP3 | CanTestPoint | 2-polar test point |
|---|