Loading design…
lhr-solar
Measures the voltage/temperature of a battery segment (8 series modules)
| Reference | Value | Description |
|---|---|---|
| IC1 | ISO1641BDR | Digital Isolators Robust-EMC bidirectional I2C digital isolator with uni-directional clock |
| U1,U3 | EL3H7 | OPTOISO 3.75KV 1CH TRANS 4-SSOP |
| U2 | BQ7692003PW | |
| U4,U6,U12-U14 | TLV9062xD | Dual operational amplifier, 300 uV Offset, SOIC-8 |
| C2 | 10μF | Unpolarized capacitor, small symbol |
| C3,C26,C28,C29,C32,C34-C41 | 1uF | Unpolarized capacitor |
| C4 | 470pF | Unpolarized capacitor |
| C5-C9,C24,C42 | 0.1uF | Unpolarized capacitor |
| C10-C17 | 100nF | Unpolarized capacitor |
| C18 | 4.7uF | Unpolarized capacitor |
| C25,C27,C30,C31,C33 | 1.2uF | Unpolarized capacitor |
| D1 | D_Zener_Small | Zener diode, small symbol |
| D2-D9 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| D10 | 3v3 | Light emitting diode |
| D14 | BQ-Fault | Light emitting diode |
| D15 | BQ_HB | Light emitting diode |
| F7-F11 |
| 10mA |
| Resettable fuse, polymeric positive temperature coefficient, small symbol |
| F12 | 40mA | Resettable fuse, polymeric positive temperature coefficient, small symbol |
|---|
| J1 | ScrutineeringConn | Generic connector, double row, 02x04, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3,J4 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | Logic_Analyzer | Connector interfacing with logic analyzers |
|---|
| J8 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10 | 53307-2471 | Board-to-board connector for Peripheral SOM daughterboards |
|---|
| J11 | Conn_01x07 | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1,R37,R41,R42,R49 | 8.2kΩ | Resistor |
|---|
| R2 | 510kΩ | Resistor |
|---|
| R3,R5 | 2kΩ | Resistor |
|---|
| R4,R9-R11,R13-R15 | 10kΩ | Resistor |
|---|
| R6,R23-R28,R30 | 0Ω | Resistor |
|---|
| R8,R12 | 1kΩ | Resistor |
|---|
| R18,R19 | 120 | Resistor |
|---|
| R31 | 4.3k | Resistor |
|---|
| R34,R38,R43,R44,R50 | 27kΩ | Resistor |
|---|
| R35,R36,R39,R40,R45-R48,R51,R52 | 2.7kΩ | Resistor |
|---|
| R53-R60 | 100Ω | Resistor |
|---|
| SW1 | BOOT | Push button switch, generic, two pins |
|---|
| TP1 | Regout | test point |
|---|
| TP2,TP5,VC0-VC5 | TestPoint | test point |
|---|
| TP3 | bmsAlert | test point |
|---|
| TP4 | SegGND | test point |
|---|
| TP6 | VBoot | test point |
|---|
| TP11-TP15 | TP_TempOut | test point |
|---|