Loading design…
lhr-solar
| Reference | Value | Description |
|---|---|---|
| IC1 | TCAN337DCNR | 3.3-V CAN Transceivers |
| IC2 | LM73100RPWR | 2.7-V TO 23-V, 5.5-A IDEAL DIODE |
| IC3 | LM74502HDDFR | Hot Swap Voltage Controllers 3.2-V to 65-V industrial RPP controller with load disconnect, OVP, and high gate drive |
| IC4 | AP64501QSP-13 | DIODES INC. - AP64501QSP-13 - DC-DC Switching Synchronous Buck Regulator, Adjustable, 3.8-40 V in, 0.8-40 V out, 3 A out, HSOIC-8 |
| IC5,IC8 | TPS2557QDRBTQ1 | Precison Automotive Adjusable Current-Limited Power-Distribution Switch |
| Module2 | ComputeModule5-CM5 | RaspberryPi Compute module 5 |
| Q2,Q3 | NVMFWS1D7N04XMT1G | Small Footprint (5x6 mm); Low RDS(on); Low QG and Capacitance; Wettable Flank Option; AECQ101 Qualified and PPAP Capable; RoHS Compliant |
| U1-U3 | TPD1E05U06DYA | 1-Channel ESD Protection for Super-Speed USB 3.0 Interface, SOD-523 |
| U13 | CDSOT23-T24CAN | CAN Bus Protector |
| U14 | MCP2515T-E/ST | Stand-Alone CAN Controller with SPI Interface, TSSOP-20 |
| BT2 | Battery_Cell | Single-cell battery Holder 20mm 6" leads |
| C1,C3,C5,C7,C10,C11,C13,C16,C22,C23,C36,C37 | 100n | Unpolarized capacitor |
| C2,C14 | 100uF | Unpolarized capacitor |
| C4,C12,C15 | 4.7nF | Unpolarized capacitor, small symbol |
| C6,C20,C27,C58 | 10uF | Unpolarized capacitor |
| C8,C9,C61 | 22uF | Unpolarized capacitor |
| C17 | 1n | Unpolarized capacitor |
| C18 | 1uF | Unpolarized capacitor |
| C19 | 220nF | Unpolarized capacitor |
| C21 | 1u | Unpolarized capacitor |
| C24,C25 | 22 pF | Unpolarized capacitor |
| C29 | 47uF | Unpolarized capacitor |
| C56 | 10nF | Unpolarized capacitor |
| C59 | 2.7nF | Unpolarized capacitor |
| C60 | 33pF | Unpolarized capacitor |
| D1 | Activity | Light emitting diode |
| D2 | PI PWR | Light emitting diode |
| D3 | DBG_PWR | Light emitting diode |
| D4 | CAN Fault LED | Light emitting diode |
| D5 | 3.3V PWR | Light emitting diode |
| D6 | PTVS6V0S1UR | 6V 7V 9.2V TVS |
| D7 | 5V PWR LED | Light emitting diode |
| D8,D10-D12,D17,D19 | TPD4E05U06DQAR | 4-Channel Ultra-Low-Capacitance IEC ESD Protection Diode |
| D9 | 24V PWR LED | Light emitting diode |
| D13 | HBT | Light emitting diode |
| D14,D18,D21 | FAULT | Light emitting diode |
| D15 | VBUS_HUB_LED | Light emitting diode |
| D16 | STUFF | Light emitting diode |
| F1 | 3568 | |
| F3 | RFuse | Fuse |
| FB1,FB2,FB4 | FerriteBead | Ferrite bead |
| H1-H4 | MountingHole | Mounting Hole without connection |
| J1 | CarLVPowerConnector | Connector for the car's 24V power bus |
| J2 | Display Breakout | Connector for the car's 24V power bus |
| J3 | RPI Pin-Header | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J6,J8 | CarCANConnector | Connector |
| J7 | HDMI_A_1.4 | HDMI 1.4+ type A connector |
| J9 | USB_A | USB Type A connector |
| J11 | RTC Battery Port | Receptacle for RTC battery |
| J12 | RTC Battery Conn | Connector for RTC battery |
| J14 | Fan Header | |
| JP1-JP6 | Jumper_2_Open | Jumper, 2-pole, open |
| L2 | 4.7uH | Inductor |
| R1,R2,R15,R20,R25,R33,R42 | 100 | Resistor |
| R3,R8,R21,R22,R45 | 400 | Resistor |
| R4,R10,R13,R27,R32,R34,R35 | 10k | Resistor,Resistor, US symbol |
| R5,R17,R19 | 1k | Resistor |
| R6,R7,R11 | 1M | Resistor |
| R9 | 120k | Resistor |
| R14 | 200k | Resistor, US symbol |
| R23 | 590 | Resistor |
| R24 | 120 | Resistor |
| R26 | 180k | Resistor |
| R30 | 15.8k | Resistor |
| R31 | 53.6k | Resistor |
| R36 | 10K | Resistor |
| R37 | 100K | Resistor |
| R38 | 8.25K | Resistor |
| R39 | 324K | Resistor |
| R44 | 3k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP1-TP3,TP5 | TestPoint | test point |
| Y4 | 8 MHz | Two pin crystal |
| Z1 | SMAF4759A-TP | 1.0 Watt Zener Diodes 6.2V to 100V |