KevinbotV3-KiCAD
meowmeowahr
Kevinbot Core - Parallax Propeller 2 Robot Controller
Components (75)
| Reference | Value | Description |
|---|---|---|
| Q1 | MUN5211T1G | NPN transistor, base/emitter/collector |
| Q2,Q3 | IRLML6402 | -3.7A Id, -20V Vds, 65mOhm Rds, P-Channel HEXFET Power MOSFET, SOT-23 |
| Q4 | BC847BDW1 | 100mA IC, 45V Vce, Dual NPN/NPN Transistors, SOT-363 |
| Q5,Q6 | CSD18543Q3A | 35A Id, 60V Vds, NexFET N-Channel Power MOSFET, 8.1mOhm Ron, Qg Typ 11.1nC, VSON-8 3.3x3.3mm |
| U1 | P2_EDGE_MODULE_SOCKET | |
| U2 | FT231XS | Full Speed USB to Full Handshake UART, SSOP-20 |
| U3,U4 | 74LVC1G126 | Single Buffer Gate Tri-State, Low-Voltage CMOS |
| U5 | THVD1451D | RS485 transceiver, 3.3-V to 5-V, 18-kV IEC ESD Protection, SOIC-8 |
| U6,U7 | TC4428xOA | 1.5A Dual High-Speed Power MOSFET Drivers, 4.5...18V supply, TTL/CMOS compatible inputs, complementary drivers, SOIC-8 |
| U8 | TS3A24159DGS | Dual SPDT 0.3Ω Bidirectional Analog Switch, TSSOP-10 |
| U9,U12 | LTC4311 | Low Voltage I2C/SMBus Accelerator |
| U10 | TS3A44159PWR | TS3A44159 0.45-Ω Quad SPDT Analog Switch 4-Channel 2:1 Multiplexer – Demultiplexer With Two Controls |
| U11 | TMUX1511PWR | Low-Capacitance, 1:1 (SPST) 4-Channel, Powered-Off Protected Switch with 1.8V Logic |
| U13 | DS18B20U | Programmable Resolution 1-Wire Digital Thermometer MSOP-8 |
| U14 | PCA9685BS | 16-channel 12-bit PWM Fm+ I2C-bus LED controller RGBA QFN |
| BZ1 | Buzzer | Buzzer, polarized |
| C1,C5 | 10nF 16v | Unpolarized capacitor |
| C2,C3 | 4.7uF 10v | Unpolarized capacitor |
| C4,C6-C14 | 100nF 16v | Unpolarized capacitor |
| C15,C19 | 100nF 100V | Unpolarized capacitor |
| C16 | 10uF 63V | Unpolarized capacitor |
| C17 | 56nF 16V 5% | Unpolarized capacitor |
| C18 | 2.2uF 35V | Unpolarized capacitor |
| C20 | 10pF 100V | Unpolarized capacitor |
| C21 | 620pF 25V | Unpolarized capacitor |
| C22,C23 | 10uF 10V | Unpolarized capacitor |
| C24 | 8200pF 50V | Unpolarized capacitor |
| C25 | 560pF 50V | Unpolarized capacitor |
| C26 | 1500uf | Polarized capacitor |
| D1,D6 | Red LED | Light emitting diode |
| D2,D7 | Blue LED | Light emitting diode |
| D3,D4 | D_TVS_Dual_AAC | Bidirectional dual transient-voltage-suppression diode, center on pin 3 |
| D5,D8 | LED | Light emitting diode |
| F1,F4 | Fuse | Fuse |
| F2,F3 | Polyfuse_Small | Resettable fuse, polymeric positive temperature coefficient, small symbol |
| FB1,R28-R43 | 220R | Ferrite bead, small symbol,Resistor |
| J1,J2,J11 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J3 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4,J5,J7,J9 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated,Generic connector, single row, 01x03, script generated |
| J6,J8,J12,J16 | Conn_02x06_Odd_Even | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_02x04_Counter_Clockwise | Generic connector, double row, 02x04, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13,J25 | Conn_02x02_Odd_Even | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J14 | Conn_02x03_Top_Bottom | Generic connector, double row, 02x03, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J15,J17 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x09, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J18,J19 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J20,J22-J24 | Conn_04x03_Servo | |
| J21 | Conn_02x02_Top_Bottom | Generic connector, double row, 02x02, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J33 | Conn_02x13_Odd_Even | Generic connector, double row, 02x13, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1,L2 | 6.8uH 11.5A | Inductor with iron core |
| R1,R2 | 5.1k | Resistor |
| R3,R4 | 27R | Resistor |
| R5,R6 | 240R | Resistor |
| R7 | 470k | Resistor |
| R8-R10 | 100k | Resistor |
| R11-R13,R21-R27 | 10k | Resistor |
| R14,R16 | 180K 0.1% 1/10W | Resistor |
| R15,R17,R19 | 10K 0.1% 1/10W | Resistor |
| R18 | 120K 0.1% 1/10W | Resistor |
| R20,R48 | 330R | Resistor |
| R44,R45 | 33k | Resistor |
| R46 | 130R | Resistor |
| R47 | 10R | Resistor |
| R49 | 2.1R | Resistor |
| R50 | 30.1k | Resistor |
| R51 | 9.53k | Resistor |
| R52 | 39.2k | Resistor |
| R53,R54 | 20k | Resistor |
| R55 | 887R | Resistor |
| R56 | 18k | Resistor |
| R57 | 121R | Resistor |
| R58 | 3.4k | Resistor |
| R59 | 2.15k | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2,SW4 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW3 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |