DATALOGGER02
mlab-modules
Arduino based data logger with LoRa IoT interface.
Components (85)
| Reference | Value | Description |
|---|---|---|
| IC1 | CY15B108QN-40SXI | F-RAM Excelon LP 40 MHz 8-EIAJ |
| IC2 | FM3164-G | -40C to +85C Integrated Processor Companion with Memory 14-pin SOIC Package |
| IC3 | LTC4041EUFD#PBF | Power Management Specialized - PMIC 2.5A Supercapacitor Backup Power Manager |
| Q1 | DMP2045UQ-7 | -4.3A Id, -12V Vds, 50mOhm Rds, P-Channel HEXFET Power MOSFET, SOT-23 |
| Q2,Q3 | DMTH3002LPS | N-MOSFET transistor, source/gate/drain |
| U1 | ISL21080CIH320Z-TK | |
| U2 | LM4041CIM3-1.2(neosazovat) | |
| U3 | ATMEGA1284P-AU | |
| U4 | TXS0108EPW | Bidirectional level-shifting voltage translator, TSSOP-20 |
| U5 | ICM-20948 | InvenSense 9-Axis Motion Sensor, Accelerometer, Gyroscope, Compass, I2C/SPI, QFN-24 |
| U6 | TPS22965-Q1 | |
| U7 | MS5611-01BA | Barometric pressure sensor, 10cm resolution, 10 to 1200 mbar, I2C and SPI interface up to 20MHz, LGA-8 |
| U8 | MIC5504-1.8YM5-TR | 300mA Low-dropout Voltage Regulator, Vout 1.8V, Vin up to 5.5V, SOT-23 |
| U9,U10 | TPS631000DRLR | Switching Voltage Regulators 1.5-A output current, high power density buck-boost converter |
| U11 | SX1262 | |
| U12 | PE4259 | RF Switch |
| BT1 | Battery_Cell-device 3V | |
| C1,C2,C5,C6,C9,C10,C14-C19,C22,C24,C25,C32,C37,C38,C45 | 100nF | Unpolarized capacitor |
| C3,C4 | 15pF | |
| C7,C23 | 10uF | |
| C8 | 4u7 | |
| C11,C33,C39 | 22uF | Unpolarized capacitor, small symbol |
| C12,C13,C29,C34 | 47uF | Unpolarized capacitor, small symbol |
| C20,C27,C31,C44 | 1uF | Unpolarized capacitor |
| C21,C26,C56 | 1nF | Unpolarized capacitor |
| C28 | 50F | Unpolarized capacitor |
| C43 | 470nF | |
| C46 | 47nF | |
| C47 | 1p8 | |
| C48 | 47pF | |
| C49 | 2p4 | |
| C50,C51,R1 | - | |
| C52,C58,C59 | 3p3 | |
| C53 | 5p6 | |
| C54,C57 | 39pF | |
| C55 | 2p2 | |
| D1 | HLMP-K150+FIX-LED-313 | |
| D2 | M4 | |
| F1 | 1.2A | |
| FID1,FID2 | Fiducial | Fiducial Marker |
| H1-H4 | MountingHole_Pad | Mounting Hole with connection |
| J1 | HEADER_2x01_PARALLEL | |
| J2 | HEADER_2x01 | |
| J3 | HEADER_2x03 | |
| J4,J5,J24 | HEADER_2x03_PARALLEL | 2x03 2.54 mm pitch header, 2 pins next to each other are connected |
| J6 | MCC-SD (kouka z modulu) | |
| J7,J14 | Conn_01x06_Female | |
| J8 | Conn_01x07_Female | |
| J9 | Conn_01x04_Female | |
| J10,J12 | HEADER_2x05_PARALLEL | 2x05 2.54 mm pitch header, 2 pins next to each other are connected |
| J11 | HEADER_2x07_PARALLEL | 2x07 2.54 mm pitch header, 2 pins next to each other are connected |
| J13 | HEADER_2x02_PARALLEL | 2x02 2.54 mm pitch header, 2 pins next to each other are connected |
| J23 | MCX | |
| JP1-JP4 | SolderJumper_3_Bridged12 | 3-pole Solder Jumper, pins 1+2 closed/bridged |
| L1 | 10uH - LQH32CN100K23L | |
| L2 | XAL-6030-182 1.8 uH | Inductor |
| L3,L4 | 1uH - DFE252012P-1R0M=P2 | Inductor |
| L5 | 15uH | |
| L6 | 15nH | |
| L7 | 0R | |
| L8 | 47nH | |
| L9 | 2n4 | |
| L10 | 4n7 | |
| L11 | 9n1 | |
| R2 | 4k7 | |
| R3,R5,R6,R8-R11,R14-R19,R21,R46,R48 | 10k | Resistor |
| R20 | 470R | Resistor |
| R22,R29 | 150k | Resistor |
| R23,R30 | 56k | Resistor |
| R24-R27 | 100 | |
| R28 | 2k2 | |
| R31 | 1M | Resistor |
| R32-R34,R39,R41 | 100k | Resistor |
| R35 | 6.2k 1/8W | Resistor |
| R36 | 2k | Resistor |
| R37 | 25mR | Resistor |
| R38 | 523k (E96) | Resistor |
| R40 | 220k | Resistor |
| R42 | 806k | Resistor |
| R43,R45 | 91k | Resistor |
| R44 | 511k | Resistor |
| R47 | 100R | Resistor |
| Y2 | 6pF crystal - 32.768kHz | |
| Y3 | 32MHz | |
| Y6 | 8MHz LFXTAL083138 | Four pin crystal, GND on pins 2 and 4 |