Loading design…
nate-i-think
Unfinished Dual MCU Command And Data Handling System for a CubeSat Princeton Rocketry
| Reference | Value | Description |
|---|---|---|
| IC1 | FM24VN10-G | Cypress Semiconductor FM24VN10-G Serial-I2C FRAM Memory, 1Mbit, 2 to 3.6 V 8-Pin SOIC |
| IC2 | ATSAMD21G18A-MFT | ARM Microcontrollers - MCU 48QFN 125C, GREEN,1.6-3.6V,48MHz |
| IC8 | IIS2MDCTR | STMICROELECTRONICS - IIS2MDCTR - MEMS MODULE, 3-AXIS MAGNETOMETER, LGA-12 |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| AC1 | LSM6DSOXTR | IMUs - Inertial Measurement Units iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope |
| C1,C3,C5,C7,C73,C74,C77,C78 | 100nF | Unpolarized capacitor |
| C2,C6,C75 | 10uF | Unpolarized capacitor |
| C4 | 1uF | Unpolarized capacitor |
| C8,C9 | 18pF | Unpolarized capacitor |
| C10 | 4.7nF | Unpolarized capacitor |
| C72 | 220nF | Unpolarized capacitor |
| J1 | SQT-110-01-L-S | 10 Position,Cost Effective Rugged PCB Sockets, 2.00mm pitch |
| J2 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J5 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | 53261-0571 | Molex PICOBLADE Series, Series Number 53261, 1.25mm Pitch 5 Way 1 Row Right Angle PCB Header, Solder Termination, 1A |
| LED3 | LS_R976-NR-1 | Standard LEDs - SMD Super Red, 633nm 180mcd, 20mA |
| LED4 | LO_R976-PS-1 | Standard LEDs - SMD Orange, 606nm 280mcd, 20mA |
| R1,R2,R13-R17 | 10k | Resistor |
| R3,R36,R37 | 1k | Resistor |
| R4-R7,R9-R12 | 5k1 | Resistor |
| R8 | 1M | Resistor |
| TP2 | VDD_CORE | test point |
| TP3 | SDA0 | test point |
| TP4 | SCL0 | test point |
| Y1 | 32.768kHz | Two pin crystal |