monty-mouse-mini
neilpstevenson
Source code for micromouse Monty Mini
Components (33)
| Reference | Value | Description |
|---|---|---|
| Q1,Q6 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q2,Q7 | SSM3K122TU | 20V Vds, 0.63 Id, N-Channel MOSFET with ESD protection, SOT-523 |
| Q3-Q5,Q8 | PT100MF0MP | |
| U1 | DRV8833PWP | Dual H-Bridge Motor Driver, HTSSOP-16 |
| U2 | AP1117-50 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| C1 | 10nF | Unpolarized capacitor |
| C2,C7 | 2.2uF | Unpolarized capacitor |
| C3 | 22uF | Polarized capacitor |
| C4 | 100nF | Unpolarized capacitor |
| C5,C6 | 4.7uF | Unpolarized capacitor, small symbol |
| C8 | 47uF | |
| D1 | SS12 | 20V 1A Schottky Diode, SMA |
| D2,D3 | LED | Infrared LED , 3mm LED package |
| D4-D7 | SFH4045N | |
| J1 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J2,J3 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J4 | LiPo2 | Generic connector, single row, 01x02, script generated |
| JP1 | batt-direct | Solder Jumper, 2-pole, open |
| R1 | 20k | Resistor |
| R2,R3,R8,R15 | 200R | Resistor |
| R4,R10 | 1k | |
| R5,R12 | 15k | |
| R6,R14 | 1R5 | |
| R7 | 10R | |
| R9 | 20R | |
| R11,R13 | 270R | |
| RZ1 | RP2040-Zero | |
| SW1 | Select | Push button switch, generic, two pins |
| SW2 | Go | Push button switch, generic, two pins |
| SW3 | ON-OFF | Switch, single pole double throw |
| TP1 | Fwd | test point |
| TP2 | Diag | test point |
| TP3 | GND | test point |