Loading design…
nfe19
A PCB board with firmware to control sensors
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F103C8T6TR | |
| U2 | TLV1117LV33DCYR | 1-A, low-dropout voltage regulator |
| U3 | TMAG5273B1QDBVR | |
| U4 | TMAG5170-Q1 | |
| U5 | LP5018RSMR | 18-channel I2C constant-current RGB LED driver |
| U6-U11 | ASMB-TTF0-0A20B | Red, Green, Blue (RGB) 620nm Red, 524nm Green, 471nm Blue LED Indication - Discrete 2.1V Red, 2.9V Green, 2.9V Blue 6-PLCC |
| U12 | AT24CS04-XHM | |
| U13 | OPT3002DNPR | |
| U14 | ICM-42670-P | |
| C1 | 10u | |
| C2,C5,C11-C14,C16-C20,C22 | 1u | |
| C3,C4,C6,C8,C15,C21,C23 | 100n | |
| C7 | 10n | |
| C9,C10 | 10p | |
| CR1 | NUP4114UCLW1T2G | |
| D1 | Red | |
| D2,D3,D5 | Yellow | |
| D4 | SM5817PL-TP | |
| FB1 | 120R | |
| GPIO1-GPIO5,GPIO10 | TestPoint | |
| H1-H4 | MountingHole | |
| J1 | Micro_SD_Card | |
| J2,J6-J8 | Conn_01x02_Pin | |
| J4,J5 | Conn_01x10_Pin | |
| J10 | Conn_01x05_Pin | |
| J11 | USB_C_Receptacle_USB2.0 | |
| R1-R13,R17-R19,R21-R24 | 1K5 | |
| R14 | 3K | |
| R15,R16,R20 | 5K1 | |
| SW1 | SW_SPDT | |
| Y1 | 16MHz OSC |