Loading design…
npgo22
| Reference | Value | Description |
|---|---|---|
| U1 | STM32H563RITx | STMicroelectronics Arm Cortex-M33 MCU, 2048KB flash, 640KB RAM, 250 MHz, 1.62-3.6V, 49 GPIO, LQFP64 |
| U2-U5 | INA241A1xD | High- and Low-Side, Bidirectional, Zero-Drift, Current-Sense Amplifier With Enhanced PWM Rejection, 10V/V, ±0.01% Gain Accuracy, ±10 μV Offset Voltage, SOIC-8 |
| U6 | ADS131A04 | |
| U7 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U9 | TJA1042T-3 | High-Speed CAN Transceiver, separate VIO, standby mode, SOIC-8 |
| U10 | LAN8742A | LAN8720 Ethernet PHY with RMII interface, QFN-24 |
| C1,C3,C39,C41 | 10pF | Unpolarized capacitor, small symbol |
| C2,C20-C22,C28,C38,C44 | 1uF | Unpolarized capacitor, small symbol |
| C4-C6,C8,C10-C15,C23,C24,C26,C35-C37,C40,C42,C43 | 100nF | Unpolarized capacitor, small symbol |
| C7,C9 | 2.2uF | Unpolarized capacitor, small symbol |
| C16-C19 | 6.8nF | Unpolarized capacitor, small symbol |
| C25,C27 | 30pF | Unpolarized capacitor, small symbol |
| C29-C34 | 22uF | Unpolarized capacitor, small symbol |
| C45 | 470pF | Unpolarized capacitor, small symbol |
| C46 | 220nF | Unpolarized capacitor, small symbol |
| D1-D3 | LED | Light emitting diode, small symbol |
| D4-D6 | LED_Small | Light emitting diode, small symbol |
| F1 | 100mA Hold | Fuse, small symbol |
| F2 | 500mA | Fuse, small symbol |
| J1 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2-J5,J8,J9 | Conn_02x01 | Generic connector, double row, 02x01, this symbol is compatible with counter-clockwise, top-bottom and odd-even numbering schemes., script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J10 | Screw_Terminal_01x05 | Generic screw terminal, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | RJ45_Hanrun_HR911105A_Horizontal | 1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX |
| R1-R3,R13,R14,R19 | 10k | Resistor, small US symbol |
| R4-R7 | 13R | Resistor, small US symbol |
| R8-R11,R25,R26 | 330R | Resistor, small US symbol |
| R12 | 150k | Resistor, small US symbol |
| R15,R16 | 4.7k | Resistor, small US symbol |
| R17 | 120R | Resistor, small US symbol |
| R18 | 1.5k | Resistor, small US symbol |
| R20,R21,R23,R24 | 47R | Resistor, small US symbol |
| R22 | 12.1k | Resistor, small US symbol |
| SW1 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |
| Y1,Y3 | 25 MHz | Four pin crystal, GND on pins 2 and 4 |
| Y2 | 16.384 MHz | Four pin crystal, GND on pins 2 and 4 |