pre-26thDenso
old-bridge
for prototyping 26denso
Components (42)
| Reference | Value | Description |
|---|---|---|
| Q3 | NPN | 600mA Ic, 40V Vce, NPN Transistor, SOT-23 |
| U1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3_TFT | |
| U2,U4,U8 | MAX3485 | True RS-485/RS-422, 10Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8 |
| U5 | MOUDLE-SEEEDUINO-XIAO-ESP32C3_logger | |
| U6 | DS3231MZ | ±5ppm, I2C Real-Time Clock SOIC-8 |
| U9 | MOUDLE-SEEEDUINO-XIAO-ESP32C3_airdata | |
| U11 | MOUDLE-SEEEDUINO-XIAO-ESP32C3_pot | |
| AS5602 | AoS | |
| AS5603 | AoA | |
| Batt1,Batt2,Batt4 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| BT2 | MS621 | Single-cell battery |
| C1 | 0.1uF | Unpolarized capacitor, small symbol |
| C2,C3 | 47uF | Unpolarized capacitor, small symbol |
| D1,D2,D4 | LED | Light emitting diode |
| D5 | D | Diode |
| DPS311 | Adafruit DPS310 | |
| J1 | 5051104096 | |
| J2 | Micro_SD_Card | Micro SD Card Socket |
| J3 | URM37 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x03 servo | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | RS485_TFT | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Conn_01x03 encoder_direct | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | RS485_logger_2 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | RS485_logger | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | BNO085 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | RE12A | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | RS485_airdata | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | Conn_01x03 speaker | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R3,R9,R13,R18,R30 | 10k | Resistor |
| R4 | 680 | Resistor |
| R5,R32 | 120 | Resistor |
| R6-R8,R11,R12,R14 | 2k | Resistor |
| R10,R20 | 3.3k | Resistor |
| R17 | 2 | Resistor |
| R22,R23,R31 | 100 | Resistor |
| R24,R28,R33-R36 | 220k | Resistor |
| R25 | 20k | Resistor |
| R26 | 330 | Resistor |
| R27 | 3k | Resistor |
| R29 | 100k | Resistor |
| SW1 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |