Loading design…
oresat
All things for the OreSat flatsat
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | DMP2035UQ-7 | P-Channel 20 V 4.9A (Ta) 810mW (Ta) Surface Mount SOT-23-3 |
| Q6 | 31-DMN2053UQ-13CT-ND | N-Channel 20 V 6.5A (Ta) 800mW (Ta) Surface Mount SOT-23-3 |
| U1 | MCP2221AxST | USB to I2C/UART Protocol Converter with GPIO, TSSOP-14 |
| U2 | INA226 | Current Monitor Regulator High/Low-Side 10mA 10-VSSOP |
| U3,U4,U8 | LTC4412xS6 | OR Controller Source Selector Switch P-Channel 2:1 TSOT-23-6 industrial temp |
| U5 | TS5A21366 | 2 Circuit IC Switch 1:1 1Ohm 8-VSSOP |
| U6 | MAX892LEUA+T | Power Switch ICs - Power Distribution Current-Limited, High-Side P-Channel Switches with Thermal Shutdown |
| U7 | MIC23050-SYML | 4MHz PWM Buck Regulator with HyperLight Load Switching Scheme, 3.3V Fixed Output Voltage |
| U9 | IP4234CZ6,125 | Clamp Ipp Tvs Diode Surface Mount 6-TSOP |
| C1,C8,C9 | 1u | 1 µF ±10% 25V Ceramic Capacitor X7R 0603 (1608 Metric) |
| C2,C6,C7 | 100n | 0.1 µF ±10% 50V Ceramic Capacitor X7R 0603 (1608 Metric) |
| C3,C4 | 4.7u | 4.7 µF ±10% 25V Ceramic Capacitor X7S 0805 (2012 Metric) |
| C5 | 470p | 470 pF ±10% 50V Ceramic Capacitor X7R 0603 (1608 Metric) |
| D1,D4 | GRN | Green 520nm LED Indication - Discrete 3.2V 0603 (1608 Metric) - 430 mcd @ 20 mA |
| D2,D3 | AMB | Amber 605nm LED Indication - Discrete 2V 0603 (1608 Metric) - 120 mA @ 20 mA |
| D6 | SS5150 | Diode 150 V 5A Surface Mount DO-214AC (SMA) |
| F1 | 0451004.MRL (4A) | 4 A 125 V 125 V Fuse Board Mount (Cartridge Style Excluded) Surface Mount 2-SMD, Square End Block |
| F2 | Fuse | Fuse Block 9 A 125V 1 Circuit Cartridge Surface Mount |
| J1 | TFM-120-X1-XXX-D-RA | OreSat backplane connector, 2x20 RA |
| J2 | SFM-120-02-L-DH | 40 Position Receptacle Connector 0.050" (1.27mm) Surface Mount, Right Angle Gold |
| J3 | USB_C_Receptacle_USB2.0_16P | USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole |
| J4 | DCJ200-10-A-K1-K | Power Barrel Connector Jack 2.05mm ID (0.081"), 5.50mm OD (0.217") Through Hole, Right Angle |
| J5 | Conn_01x04 | Connector Header Through Hole 4 position 0.138" (3.50mm) |
| L1 | 1uH | 1 µH Shielded Multilayer Inductor 800 mA 100mOhm 0805 (2012 Metric) |
| R1 | 10m | 10 mOhms ±0.5% 1W Chip Resistor 1206 (3216 Metric) Anti-Sulfur, Automotive AEC-Q200, Current Sense, Moisture Resistant, Pulse Withstanding Metal Element |
| R2,R3 | 5.1k | 5.1 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R4 | 23.7k | 23.7 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Moisture Resistant Thick Film |
| R5-R7,R11-R14 | 10k | 10 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R9,R10 | 4.7k | 4.7 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R16-R23 | 100 | 100 Ohms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| SW1 | C&K PCM13SMTR | Slide Switch, SP3T, SMT, RA |
| SW2 | SW_DP3T | Switch, three position, dual pole triple throw, 3 position switch, SP3T |