ASAT
pestvillian
ECE129 Repo
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U2 | STM32F429VIT6 | STMicroelectronics Arm Cortex-M4 MCU, 2048KB flash, 256KB RAM, 180 MHz, 1.8-3.6V, 82 GPIO, LQFP100 |
| C1,C4-C10,C14 | 100n | Unpolarized capacitor |
| C2 | 1u | Unpolarized capacitor |
| C3,C11 | 10u | Unpolarized capacitor |
| C12,C13 | 22u | Unpolarized capacitor |
| C15,C16 | 10p | Unpolarized capacitor |
| C17,C18 | 2u2 | Unpolarized capacitor |
| D1 | RED | Light emitting diode |
| D2-D4 | P6SMB6.8 | Bidirectional ESD protection diode, ±5.5Vrwm, 0.23pF, SG-WLL-2-3 |
| D5 | GREEN | Light emitting diode |
| FB1 | 120R | Ferrite bead |
| J1 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2,J4 | USB_B_Micro | USB Micro Type B connector |
| J3 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | 2x17 odd-even connector | Generic connector, double row, 02x17, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R5 | 1k | Resistor |
| R2 | 10k | Resistor |
| R3,R4 | 220R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |