kicad-project-totem
pikaro
Components (30)
| Reference | Value | Description |
|---|---|---|
| Q1 | MMBT5551L | 0.6A Ic, 160V Vce, NPN Transistor, SOT-23 |
| Q2 | IRF5210STRLPBF | P-MOSFET transistor, gate/drain/source |
| Q3 | IRLML0100TRPBF | N-MOSFET transistor, gate/source/drain |
| U1 | 74AHCT1G125 | Single Buffer Gate Tri-State, Low-Voltage CMOS |
| U11 | TPS22995H | |
| U13 | INA226 | High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-36V) with I2C Compatible Interface, TSSOP-10 (Texas DGS0010A / VSSOP) |
| C39 | 0u1 | Unpolarized capacitor |
| D1-D3 | BLUE | Light emitting diode |
| D4 | GREEN | Light emitting diode |
| J1 | UART | Generic connector, single row, 01x02, script generated |
| J2 | 3V3 | Generic connector, single row, 01x02, script generated |
| J3 | 5V | Generic connector, single row, 01x02, script generated |
| J4 | VAR1 | Generic connector, single row, 01x02, script generated |
| J5,J6 | I2C | |
| J7 | PWR_SHUNT | Generic connector, single row, 01x02, script generated |
| J8 | VAR2 | Generic connector, single row, 01x02, script generated |
| J9 | 48V_OUT | Generic connector, single row, 01x02, script generated |
| J10 | 48V_IN | Generic connector, single row, 01x02, script generated |
| J11 | HEATER | Generic connector, single row, 01x02, script generated |
| J12 | USB | |
| J18 | SDCARD | Generic connector, single row, 01x05, script generated |
| R1,R3 | 10k2 | Resistor |
| R2 | 6k98 | Resistor |
| R5,R6,R8,R12,R13,R66,R67 | 10k | Resistor |
| R7 | 47k | Resistor |
| R9,R11 | 100k | Resistor |
| R10 | 100 | Resistor |
| R55,R56,R58 | 1k | Resistor |
| R57 | 4k7 | Resistor |
| R64,R65 | 10 | Resistor |