flight_controller_board
proveskit
The main flight computer board for the PROVES Kit.
Components (95)
| Reference | Value | Description |
|---|---|---|
| IC2 | AZ1117CH-3.3TRG1 | 1.35A 3.3V LDO Reg. Current Limit SOT223 DiodesZetex AZ1117CH-3.3TRG1, LDO Voltage Regulator, 0.8A, 3.3 V +/-1%, maximum of 15 Vin, 3-Pin SOT-223 |
| IC3 | RV-3028-C7_32.768kHz_1ppm_TA_QC | Real Time Clock 32.768kHz I2C Time Acc. 1ppm |
| IC6 | LT3652IMSE#PBF | Battery Management Power Tracking 2A Battery Charger for Solar Power |
| U1 | TLV1704 | Analog Comparators 2.2-V to 36-V, radiation tolerant microPower quad comparator in space enhanced plastic 14-TSSOP -55 to 125 |
| U2 | ZDSD04GLGEAG | http://www.zettadevice.com/upload/file/pdf/Zetta%20SD%20Nand%20DS.pdf |
| U3,U19,U21-U24,U29 | AP22653AW6-7 | |
| U4 | RFM98PW | 433 MHz 1W Radio |
| U5 | RFM9xBreakout | |
| U6 | TPS4H160AQPWPRQ1 | Quad channel automotive load switch |
| U7 | LSM6DSOTR | |
| U8 | LSM303AGRTR | |
| U9 | MCP23017_SS | 16-bit I/O expander, I2C, interrupts, w pull-ups, SSOP-28 |
| U10 | TPS54226PWPRPWP14_2P31X2P46-L | 3.3V Switching Regulator |
| U11 | W25Q128JVS | |
| U12 | TCA9548ARGERQ1 | |
| U13 | TPS7A4501DCQT | Adjustable LDO |
| U14,U15 | INA219AxD | |
| U16 | MCP9808T-E/MS | |
| U17 | LMC555CMX/NOPB | CMOS Timer, 555 compatible, SOIC-8 |
| U18 | RP2350_60QFN | |
| U20 | 74LVC1G04 | Single NOT Gate, Low-Voltage CMOS |
| U25 | TPS2HB50AQPWPRQ1 | |
| U30 | E28-2G4M27S | |
| C2,C67,C70-C74,C76-C78 | 100n | |
| C12,C14,C20-C24,C39,C40,C42 | 10uF | 10 µF ±10% 16V Ceramic Capacitor X5R 0603 (1608 Metric),10uF +-20% 10V X5R |
| C13,C15,C16 | 22uF | 22uF +-20% 10V X5R |
| C17,C18,C26-C30,C32-C35,C38,C44,C47-C53,C55,C79,C80 | 100nf | |
| C19,C25 | 100uF | 100uF 16V X5R 1210 |
| C31,C54,C56-C58 | 220nf | |
| C36 | 3.3nF | 3.3nF +-10% 100V X7R 0603 |
| C37,C41,C43,C45 | 1uF | 10uF +-20% 10V X5R,1uF 0603 X7R |
| C46 | 10nF | 10nF +-20% 10V X5R |
| C63,C64 | 15p | |
| C65,C66,C68,C69 | 4.7u | |
| C75 | 10u | |
| C1017-C1028 | CPH3225A | Supercapacitors / Ultracapacitors Reflow EDLC 3.3V, 11mF, 160 Ohm |
| D1-D3,D5 | LED | |
| D4 | NSR0320 | |
| D6 | GREEN | Green 520nm LED Indication - Discrete 3.2V 0603 (1608 Metric) - 430 mcd @ 20 mA |
| D7 | 1N4151WS | Diode Standard 50V 150mA Surface Mount SOD-323 |
| D9-D11,D13 | DFLS130L-7 | |
| D12,D14 | DFLS130L | Schottky diode |
| J1 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2,J11 | DF11CZ-12DP-2V(27) | |
| J3 | Life Makes Lemonade | |
| J5 | BM04B-SRSS-TB(LF)(SN) | |
| J6 | Conn_Coaxial | |
| J7 | INHIBIT_P1 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | INHIBIT_S1 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | INHIBIT_P2 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J14 | Battery Input | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J16 | DEBUG | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J17 | Face4 (Z- Face) | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J18 | Payload | Generic connector, double row, 02x06, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J19 | ISS_INHIBIT | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J20 | RBF_Inhibit | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J21 | Heater Output | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J22 | SWD Port | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J23 | Aux Deploy 1 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J24 | Deploy 2 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J29 | INHIBIT_S2 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | Jumper_3_Bridged12 | Vertical Header - 0.1in (2.54mm) |
| JP2,JP6 | SolderJumper_2_Open | |
| L1 | 3.3uH | 3.3uH Shielded Inductor |
| L2 | 10uH | 33uH Shielded Inductor |
| L3 | 3.3u | |
| R1,R2,R5,R6,R11,R13,R14,R16-R18,R22,R24,R25,R28,R39,R41,R42,R44,R45,R52,R53,R56-R62,R83,R84,R90,R124 | 10k | 10 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,100K 0603,10k 0603 |
| R3,R4,R10,R12,R29,R31,R81,R93,R102 | 1k | 1 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,100K 0603,1K 0603,1k 0603 |
| R7,R8 | 22 | USB Termination Resistor |
| R9 | DNF | |
| R15,R63,R70,R89 | 10K | 100K 0603,10K 0603 |
| R19-R21 | 3.0k | 3 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R23,R46-R51 | 47k | 47 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R30,R32-R34,R36,R37,R66-R68,R76-R80,R86,R92,R95-R97,R101 | 100k | 100 kOhms ±5% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,100K 0603,787K 0603 |
| R35 | 4.7M | 4.7 MOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| R38 | 73.2K | 73.2K 0603 |
| R40 | 22.1K | 22.1K 0603 |
| R43,R65 | 100K | 100K 0603,200K 0603 |
| R54,R55,R82,R85 | 15k | 15k 0603 |
| R64 | 3.3K | 3.3K 0603 |
| R69 | 94k | 787K 0603 |
| R71 | 634k | 787K 0603 |
| R72,R73 | 0.002 | 0.1 1% 2W 2512 |
| R74 | 412k | 787K 0603 |
| R75 | 0.1 | 787K 0603 |
| R91 | 0 | |
| R94 | 33 | |
| R100,R103,R104 | 4.7K | 4.7K 0603 |
| SW1,SW2 | KMR2 | |
| SW3 | SW_Push_SPDT | Momentary Switch, single pole double throw |
| TP1 | USBBOOT | |
| TP2,TP6-TP8 | RESET | |
| TP3,TP4,TP15 | TestPoint | |
| Y1 | ABM8-272-T3 |