Loading design…
proveskit
Trying out a single board implementation for the PROVES Kit again!
| Reference | Value | Description |
|---|---|---|
| IC3 | RV-3028-C7_32.768kHz_1ppm_TA_QC | Real Time Clock 32.768kHz I2C Time Acc. 1ppm |
| IC4 | LT3652IMSE#PBF | Battery Management Power Tracking 2A Battery Charger for Solar Power |
| Q1 | MMBT2222AT | Single NPN BJT |
| Q2,Q3 | IRLML2803 | Single N-Channel MOSFET |
| Q4,Q5 | NDS8434 | P-Channel MOSFET |
| Q6,Q9 | FDMQ86530L | Mosfet Array 4 N-Channel (H-Bridge) 60V 8A 1.9W Surface Mount 12-MLP (5x4.5) |
| Q7,Q8,Q10,Q11 |
| Mosfet Array 2 P-Channel (Dual) 20V 2A 600mW Surface Mount SOT-26 |
| U1,U3 | LT8610EMSE_PBF |
|---|
| U2,U8 | TLV1704 | Analog Comparators 2.2-V to 36-V, radiation tolerant microPower quad comparator in space enhanced plastic 14-TSSOP -55 to 125 |
|---|
| U4 | TCA9548APWR |
|---|
| U5 | LSM6DSOTR |
|---|
| U6 | LSM303AGRTR |
|---|
| U7,U9 | RFM98PW | 433 MHz 1W Radio |
|---|
| U10 | RFM9xBreakout |
|---|
| U11 | MCP9808T-E/MS |
|---|
| U12,U13 | INA219AxD |
|---|
| A1 | Pimoroni_PGA2350 | RP2350 breakout board modelled on a Pin Grid Array with all 48 GPIOs broken out |
|---|
| C1,C3,C5-C8 | 4.7uF | GRT188R61E475KE13D |
|---|
| C2,C4 | 10nF | GCM155R71H103KA55D |
|---|
| C9,C10,C42,C43 | 0.1uF | 3.3nF +-10% 100V X7R 0603,GRM155R71C104KA88J |
|---|
| C11 | 47uF | MLASE31LBB5476MTNA01 (alternatively EMK316BBJ476ML-T) |
|---|
| C12 | 68uF | C3216X5R1A686M160AC (if out of stock alternative: C3216X5R0J686M160AB) |
|---|
| C13 | 10pF | GRM1555C1H100JA01D |
|---|
| C14-C16 | 220u | 220µF Molded Tantalum Capacitors 16V 2917 (7343 Metric) 100mOhm @ 100kHz,220µF Molded Tantalum Capacitors 25V 2924 (7361 Metric) 100mOhm @ 100kHz |
|---|
| C17-C21,C28,C44-C47 | 10u | 10 µF ±10% 16V Ceramic Capacitor X5R 0603 (1608 Metric) |
|---|
| C22 | 4.7pF | GJM1555C1H4R7CB01D |
|---|
| C23,C24,C38,C40 | 1uF | 10uF +-20% 10V X5R,GRM155R61E105MA12D |
|---|
| C29-C33,C35 | 100nf |
|---|
| C34 | 220nf |
|---|
| C36,C37,C39,C41 | 10uF | 10uF +-20% 10V X5R |
|---|
| C51,C52 | 100nF | Unpolarized capacitor |
|---|
| D1-D3,D9 | LED |
|---|
| D4,D6,D8,D16,D18,D19 | 1N4151WS | Diode Standard 50V 150mA Surface Mount SOD-323 |
|---|
| D5,D17 | GREEN | Green 520nm LED Indication - Discrete 3.2V 0603 (1608 Metric) - 430 mcd @ 20 mA |
|---|
| D7,D13,D15 | DFLS130L | Schottky diode |
|---|
| D10-D12,D14 | DFLS130L-7 |
|---|
| FB1,FB2 | FerriteBead | HI0603R300R-10 (5A rating) |
|---|
| J1,J2,J5,J7 | Breakout |
|---|
| J6 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J8 | Molex 503398-1892 | MicroSD SMT Push-Push 1.28mm height MicroSD SMT Push-Push 1.28mm height |
|---|
| J9,J10 | Conn_Coaxial |
|---|
| JP1,JP3,JP4,JP7 | SolderJumper_2_Open |
|---|
| JP5,JP6 | Jumper_3_Open |
|---|
| K1 | APAN3105 |
|---|
| L1 | 10uH | 33uH Shielded Inductor |
|---|
| L2-L4 | 4.7uH | DFE322520FD-4R7M=P2 |
|---|
| L5 | 8.2uH | SRP4020TA-8R2M (alternative PA5402.822NLT) |
|---|
| L6 | 1uH | Inductor |
|---|
| LED1 | WS2812B_SK6812_1515 |
|---|
| R1,R3-R6,R9-R11,R15,R16,R26,R27,R33-R35,R37-R39,R55,R56,R59,R60,R65-R67,R70,R72-R74,R78,R79,R89-R91,R94 | 10k | 10 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,100K 0603,10k 0603 |
|---|
| R2 | 60.4k | RT0402FRE0760K4L |
|---|
| R7 | 110k | RT0402FRE07110KL |
|---|
| R8,R71 | 10 (1206) | 10 Ohms ±1% 0.5W, 1/2W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200, Pulse Withstanding Thick Film |
|---|
| R12-R14,R75-R77 | 3.0k | 3 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
|---|
| R17,R19,R30,R31,R68,R80,R82,R92 | 1k | 1 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,ERJ-2RKF1001X |
|---|
| R18,R20-R22,R24,R25,R41,R63,R64,R81,R83-R85,R87,R88 | 100k | 100 kOhms ±5% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film,100K 0603,787K 0603 |
|---|
| R23,R86 | 4.7M | 4.7 MOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
|---|
| R28,R29,R52,R53 | 0 | ERJ-2GE0R00X,Resistor |
|---|
| R32,R36 | 1M | ERJ-2RKF1004X |
|---|
| R40 | 100K | 200K 0603 |
|---|
| R42 | 94k | 787K 0603 |
|---|
| R43,R51 | 10K | 100K 0603 |
|---|
| R44,R58 | 634k | 787K 0603 |
|---|
| R45,R50 | 412k | 787K 0603,CPF0402B412KE1 (25ppm) |
|---|
| R46 | 0.1 | 787K 0603 |
|---|
| R47,R48 | 0.002 | 0.1 1% 2W 2512 |
|---|
| R49 | 243k | RP73PF1E243KBTDF (25 ppm) |
|---|
| R54 | 2.2k | Resistor |
|---|
| R57 | 100 | 10k 0603 |
|---|
| R61,R62 | 4.7k | 4.7k 0603 |
|---|
| R69,R93 | 47k | 47 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
|---|
| SW1,SW2 | KMR2 |
|---|
| SW4 | SW_SPDT | Switch, single pole double throw |
|---|
| TP7 | USBBOOT |
|---|
| TP8,TP10-TP12 | RESET |
|---|